May 12, 2025, 11:16:02 PM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
Fitting a towbar on a ZJ?
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: Fitting a towbar on a ZJ? (Read 3858 times)
0 Members and 1 Guest are viewing this topic.
Graham
Guru
Guru: 0
Offline
Posts: 205
Fitting a towbar on a ZJ?
«
on:
July 12, 2016, 05:37:03 PM »
Looks like my ZJ has had the safety recall and a rear protection bar fitted to mitigate the risk of fuel tank rupture in the event of a rear end smash.
So...I would like a towbar.
I can buy one and fit, but where do I stand in terms of suitability? Apparently, the UK spec bars don't meet the standards to satisfy the recall and the US spec bars are not approved for use in the UK.
Help!
Logged
Jonny Jeep
Regular Member
Guru
Guru: 11
Offline
Posts: 1372
Vehicle: TJ 4.0 Sport
Year: 1997
Re: Fitting a towbar on a ZJ?
«
Reply #1 on:
July 12, 2016, 10:22:37 PM »
Looking at your earlier posts the ZJ is a 96. Any vehicle first registered before 1st Aug 98 does not require a type approved towbar, which means there's nothing to stop you fitting a US towbar to your ZJ. Just remember, if you get one with a 2" towball you'd need to swap it for a smaller 50mm one.
Logged
bigjeepzj
Club Member
Guru
Guru: 22
Offline
Posts: 3438
lift it, brake it, Fix it brake it, fix it again
Re: Fitting a towbar on a ZJ?
«
Reply #2 on:
July 13, 2016, 08:45:40 PM »
Got a hidden hitch and both of mine
http://www.quadratec.com/products/72016_701_07.htm
Logged
Graham
Guru
Guru: 0
Offline
Posts: 205
Re: Fitting a towbar on a ZJ?
«
Reply #3 on:
July 13, 2016, 09:21:04 PM »
I may have a plan B.
The Mopar rear guard bar is effectively a tow hitch without the square receiver. It's a beast of a bar and mounts in the same way as a tow hitch.
Thinking who can weld 5mm steel well locally and just weld a receiver tube on with a reinforcing plate underneath.
Logged
bigjeepzj
Club Member
Guru
Guru: 22
Offline
Posts: 3438
lift it, brake it, Fix it brake it, fix it again
Re: Fitting a towbar on a ZJ?
«
Reply #4 on:
July 13, 2016, 10:22:09 PM »
good plan
Logged
ron5
Guest
Re: Fitting a towbar on a ZJ?
«
Reply #5 on:
July 22, 2016, 09:11:30 AM »
They fit a replacement tow bar now if you have an aftermarket tow bar fitted on the recall so they should be available?
Logged
Graham
Guru
Guru: 0
Offline
Posts: 205
Re: Fitting a towbar on a ZJ?
«
Reply #6 on:
July 22, 2016, 08:02:49 PM »
Mines already had the recall and had the Mopar safety bar fitted. 2" hitch will be welded to this shortly.
Logged
robbieg
Guest
Re: Fitting a towbar on a ZJ?
«
Reply #7 on:
July 25, 2016, 10:26:44 PM »
When I had my recall done I asked for my old towbar back they said I could have it after 90 days if jeep didn't ask for it if you need one you could give a jeep dealer a call and see if they have any old towbars around the back you could have
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
Fitting a towbar on a ZJ?
Powered by
EzPortal
Go Up
Go Down