Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: CB location in an XJ?  (Read 5610 times)

0 Members and 1 Guest are viewing this topic.

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
CB location in an XJ?
« on: August 03, 2006, 02:32:14 PM »

Not that technical really but, where have people mounted their CBs in an XJ - specifically facelift models.

I've seen a few from searching the 'net but would like suggestions from anyone here.

I should probably also say it's a small Team MC-8 and I'm pretty fussy about making sure things fit 'right' - no suggestions of bungee-cord fixings please!


Thanks, James.
Logged

chrisjones

  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
(No subject)
« Reply #1 on: August 03, 2006, 02:43:23 PM »

I've got mine under the dash to the RHS of the steering wheel, with the mic. clip by the air vent above.

Makes running the ariel lead easy, under the plastic trim along the sill, through the boot and up the rear pillar to pop out through the tailgate and into the rain channel.
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

Mort

  • Guest
(No subject)
« Reply #2 on: August 03, 2006, 05:29:37 PM »

Hi James

Been having the same dilemma with my TJ.  Chris at SOR suggested mounting it behind the centre console (flat against it), as it keeps everything to hand, but it's not an obvious place, and it would be largely out of sight.

The same position might work on your XJ - although you have an ash tray there, and I don't - as long as you're not likely to be changing channels on a regular basis.

Nick
Logged

keeko

  • Guest
(No subject)
« Reply #3 on: August 03, 2006, 07:08:25 PM »

Mine is fitted on the right hand side of the center console (next to your left leg) with the speaker built in and facing out. Its fixed by seriously sticky Velcro (available on flea bay) and is easy to use/change channel and can be fidled with on the move...... :oops:
  Cables goes round back of pedals (NO IT WONT CATCH) and up to front right hand corner of roof.
Logged

ExtremeTJ

  • Guest
(No subject)
« Reply #4 on: August 03, 2006, 09:52:21 PM »

Here is the TJ one.





Logged

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
(No subject)
« Reply #5 on: August 04, 2006, 11:14:46 AM »

Thanks for the ideas.

With the big overhead console in facelift XJs mounting above would require some creative fab work and loss of the storage up there - glasses and PDA for me.

I had considered fabricating a new facia to integrate the CB and CD player into the space left by the factory one. It would take some time that I don't have at the moment but I may explore this later.

I think I'm leaning towards fixing on the transmission tunnel by my left leg. I'll just have to see if it gets in the way with time. This also seems to be a good place as the speaker is open and not hindered by dash etc.

Any more ideas appreciated but I know there's limited options for space in a XJ  :roll:

Thanks, James
Logged

Mort

  • Guest
(No subject)
« Reply #6 on: August 04, 2006, 12:51:40 PM »

Quote from: "mmore"
Quote from: "Mort"
.............Been having the same dilemma with my TJ.  

@Mort - You might want to have a look at this:

Project CB in a TJ

http://www.birtydastardsjeepclub.com/fo ... ight=mount


Cheers! :smt023
Logged

Plum

  • Guest
(No subject)
« Reply #7 on: August 04, 2006, 01:45:36 PM »

Now i know its a personal choice where u put it however my ariel is gutter mounted between doors an the coax is hidden through the door seal as nicked idea from

http://go.jeep-xj.info/

brilliant chap an brilliant site for XJs

hope this helps James . . . . . . cheers . . . . . . .Plum . . . . . . .
Logged

Plum

  • Guest
(No subject)
« Reply #8 on: August 04, 2006, 01:52:45 PM »

Also have had speakers by my leg an its really anoying so me CB is now fastened under dash as "chrisjones" but mines nearer to the ctr using original holes for mounting an then wires are all hidden very tidy . . . . . . .
Logged

Psychoman

  • Guest
(No subject)
« Reply #9 on: August 04, 2006, 05:49:08 PM »

Hi James,

When I had an auto 4.0 XJ I mounted the CB tight between the drivers seat and the centre console (and cheated - spliced the wires from the elecy seat to provide a power supply). Nice and out of the way, no chance of catching your leg and pretty much out of sight re light fingered oiks. Speaker was pretty good too, so no problems in use.

Worth a thought?
Logged

PeteS

  • Guest
(No subject)
« Reply #10 on: August 04, 2006, 06:18:06 PM »

Mines by my left leg, fixed to the center console, never gets in the way and mine is a manual.
Pete
Logged

Mort

  • Guest
(No subject)
« Reply #11 on: August 04, 2006, 06:56:00 PM »

I had a look around Trish's XJ for likely locations today, and came up with the same idea as Psychoman - seems ideal to me. 8)
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #12 on: August 04, 2006, 07:40:40 PM »

I wedged mine between the passenger seat and centre console for a while, but with the waterproof seat covers it just flew into the passenger footwell each time I used the brake. Now I've screwed it just in front of where the passengers knee would be, which has the added advantage of knee-capping them if they're not holding tight enough = cool :lol:
Logged
Pages: [1]   Go Up
 

Powered by EzPortal