Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Asylum]

Where have you all extended your axle and gearbox/transfer box pipes too?

I am thinking of extending them and fixing them so they are plugged into the air intake box. Effectively so they draw air along with the engine from the snorkel.

Good idea/Bad idea what has anybody else done?

I am open to better ideas.

Also. I know where the front and rear axle breather pipes are located. Also know there is a breather on top the gearbox behind the engine. Is that breather just for the Gearbox or is it for the gearbox and transferbox? I ask because I cant sem to find a pipe for each?

Any help great appreciated.

Cheers
Clayt
 

[greggmo]

the air box is the common one. bear in mind the axle breathers are pretty high anyway and as for the gearbox it breathes in to the bell housing. i was in two minds whether to seal up the bell housing and put a breather out of the top but haven't done it yet so no real guidelines mate.

[isle of man]

i have my breathers routed through my over screen bar but have been considering this kit as a better option.


http://http://cgi.ebay.co.uk/LAND-ROVER-Gearbox-Axle-Breathers-The-Ultimate-Kit_W0QQitemZ170038185923QQihZ007QQcategoryZ31348QQssPageNameZWDVWQQrdZ1QQcmdZViewItem?hash=item170038185923




peter henry

[Warthog]

i have my breathers routed through my over screen bar but have been considering this kit as a better option.


http://http://cgi.ebay.co.uk/LAND-ROVER-Gearbox-Axle-Breathers-The-Ultimate-Kit_W0QQitemZ170038185923QQihZ007QQcategoryZ31348QQssPageNameZWDVWQQrdZ1QQcmdZViewItem?hash=item170038185923




peter henry

Find ya nearest "Pirtek" outlet and make them up yourself (or if ya Asylum, nick'em off a mate) The pushfit connectors come in most thread sizes and there are options for plastic or metal fittings. The manifold in the ebay piccie is a good idea though

The easiest way IMHO is to get the double contectors, so you can just extend the originals.

[Asylum]

Cheers  guys.

Thanks for the bits Frog   and am going to look into a manifold arrangement as pointed in the correct direction from Peter and Frog.

Greggmo, do you think it would be easy to block the bottom of the bell housing and attach a pipe on top? Or would it require some dandy fabbing?

After a long discussion with Frog and looking at his Landy setup, it seems odd Jeep designed it that way. There isnt some reason I dont know about is there? Nothing to do with cooling etc?

Thanks again

Clayt
 

[Warthog]

SSSSSSsssssssssshhhhh! Don't mention the "L" word :axe:

I deny it all, i tell ya