Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: TJ Door Inner Card Removal  (Read 4662 times)

0 Members and 2 Guests are viewing this topic.

thorna

  • Guest
TJ Door Inner Card Removal
« on: May 31, 2007, 09:49:01 AM »
I need your advice:
I need to replace the outer door handles on my TJ after they had a bad reaction to steam cleaning some time ago!
I've been following the factory manual & can get the window winders off & all the screws holding the card.
Do I need to undo the inner door handle & both door pull screws?
Also the inner is held in place by push on plastic clips; as its so tight on the door I can't get a trim removal tool in. :oops:
Any tips to doing this withou bosting something or should I just wrench it off?
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #1 on: May 31, 2007, 09:09:08 PM »
a largish flat bladed screw driver will do it just feel your way round the card to find the clips a gentle but firm flick will pop them out  if you are unlucky and bust one or two  go down the scrappys they are a common fitment  but i would not think they can be the dear from the stealers
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

thorna

  • Guest
(No subject)
« Reply #2 on: June 04, 2007, 10:55:38 AM »
Thanks for the info Bubba! Big screw driver wrenching is the way to go! Good to see the clips are available if (when) I break some!
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal