Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tag]

Is the standard exhaust on the cherokee cat back, the same on the 4liter as the 2.5? on the same year     I'm led to believe it is..........cheers

[monkey_biz]

no but the can be made to fit. there is a slight difference in bore size

[tag]

Ok   got my new exhaust today,  measured the cat in bore and it's the same as the one on the jeep, also the tail pipe dia is the same. the only problem i can see is it's missing the rear hanger bracket but i can get one welded on.  the exhaust i bought is for a 97 4 liter code xch3 , hope this helps anyone looking  for a pipe for a 2.5 , update when it's fitted......

[Mike Pavelin]

They don't have a bracket. There should be a rubber mounting on the chassis behind the rear wheel with a metal hook that is clamped to the tailpipe with an exhaust clamp.

[tag]

the one on my jeep has a metal hanger on the rear  and a rubber block on the chassis............

[monkey_biz]

Ok   got my new exhaust today,  measured the cat in bore and it's the same as the one on the jeep, also the tail pipe dia is the same. the only problem i can see is it's missing the rear hanger bracket but i can get one welded on.  the exhaust i bought is for a 97 4 liter code xch3 , hope this helps anyone looking  for a pipe for a 2.5 , update when it's fitted......

hmmm the 4ltr ones we fitted to 2.5's were slightly bigger and required extra paste and extra clamping. cool if it fits ok.

just picked a new one up for the grand for £50 off eblag

[tag]

Nice,   mine cost £39.60!........

[andyyam 60]

£39.60 !!! sounds like a real bargain , think i'll have to get me one of them

[tag]

Not one for £39.60!!!!      LOLLLLLLLLLLLLLLLLL :lol:  

[Dave69]

the only hanger on the 4ltr is off the end of the silencer box. the other hanger at the exhaust tip end is to the squashed rubber mount on the body. bolts are normally siezed in place and sheer. just get a hanger from halfruads and drill a bolt hole to the rear spring mount area

[tag]

Fitted today,  had to cut off the rear bracket on the old pipe and weld it on the new one.  Noticed the muffler is deeper/ fatter  on the new one,  also the tail section is shorter by about a inch  the output bend is level with the spring shackle, other than that it went on like a well worn sea boot , The performance has changed it drives a lot smoother maybe the fatter muffler lets the engine breathe better? well it looks  good and I'm  

[Bubba]

sweet result then

[tag]

Found a drawing, for those of you who haven't seen the rear pipe mount  setup used on my jeep