Topic: jx font driveshaft (Read 5510 times)

Dave69 · « **on:** August 10, 2008, 08:30:54 PM »

The nearside front uj on on the xj failed whilst in cornwall. i.e grab driveshaft and measure the play when moved, this then remained intact for the epic journey home.

question is before i look at it indepthly is this an easy fix apart from needing a press to get the spider out, or is it worthwhile juncking the axle and uj and source an uprated driveshaft from the states without spending a stupid amount of money.

any web links will be apreciated

MOCAJ · « **Reply #1 on:** August 10, 2008, 08:41:06 PM »

replace the uj, got mine from lighthouse or the states if you can wait a few days

this is for a Tj, but basically the same

http://www.stu-offroad.com/axle/balljoi ... oint-1.htm

Bubba · « **Reply #2 on:** August 10, 2008, 08:43:22 PM »

you dont gotta use a press

MOCAJ · « **Reply #3 on:** August 10, 2008, 08:50:04 PM »

ooops, i posted the wrong link :oops:

i will leave that one there as its useful for ball joints

hang on a minute

PtP · « **Reply #4 on:** August 10, 2008, 08:53:34 PM »

Quote from: "my other cars a jeep"

ooops, i posted the wrong link :lol:
http://www.stu-offroad.com/axle/ujoint1/u-joint-1.htm

MOCAJ · « **Reply #5 on:** August 10, 2008, 08:56:56 PM »

you beat me to it, thanks Pete

and kevs right, you can use a big hammer and some sockets of various sizes :wink:

Dave69 · « **Reply #6 on:** August 10, 2008, 09:02:50 PM »

i have already got a few uj's just wondered if it was worth it upgrading for something a bit more beefy, is it "safe" LOL to assume DANA 30 items are interchangeable

?

PtP · « **Reply #7 on:** August 10, 2008, 10:30:02 PM »

I can’t really help you about the inter-changeability, but when I ordered my replacements from Lighthouse, I recall they offered me three options; cheap shit ones which were ok for just road use, greaseable ones which were not as strong as the original Spicer ones or the original non-greaseable Spicer ones. I went for the non-greaseable Spicer ones.

daggie · « **Reply #8 on:** August 11, 2008, 06:14:47 AM »

just replace with a spicer unit, as ptp says.
how many miles has the xj done 100k+, its probably the original, do tother side too, while your there

Author Topic: jx font driveshaft (Read 5510 times)

Dave69

jx font driveshaft

MOCAJ

(No subject)

Bubba

(No subject)

MOCAJ

(No subject)

PtP

(No subject)

MOCAJ

(No subject)

Dave69

(No subject)

PtP

(No subject)

daggie

(No subject)