Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: YJ auto box breather relocation  (Read 4744 times)

0 Members and 1 Guest are viewing this topic.

normalbloke

  • Guest
YJ auto box breather relocation
« on: January 02, 2008, 06:35:38 PM »
"Copied into this forum for a friend....

"so,ive blown the engine on my yj,i have the old engine out and want to block the auto box breather in the bell housing and relocate to somewhere else on the box,anyone done it?if so,where did you put it?
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #1 on: January 02, 2008, 06:49:03 PM »
The hole behind the torque coverter has to be plugged and a new hole drilled in the top of the transmission housing to take a breather hose fitting.
Logged

Dodster

  • Guest
(No subject)
« Reply #2 on: January 02, 2008, 07:35:53 PM »
I have had it done but i didnt do it myself... 8)
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #3 on: January 02, 2008, 07:35:59 PM »
well worth doin too. 8)
Logged

normalbloke

  • Guest
(No subject)
« Reply #4 on: January 06, 2008, 06:49:31 PM »
Thanks all,we found the answer on a US forum and did it yesterday.

It was a last minute decison as he'd blown the engine,and while the block was out, seemed like the obvious thing to do.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal