Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: WINCH  (Read 5626 times)

0 Members and 2 Guests are viewing this topic.

cleggy

  • Guest
WINCH
« on: May 03, 2008, 09:43:56 PM »
Hi i have a Warn TI !!!The problem is it will let the rope out but when i try try to retact it i get nothing!!!Ive had it in pieces and cleaned it all and still nothin is happening!!! Any ideas would be welcome!!! cheers
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #1 on: May 03, 2008, 11:28:16 PM »
no leccy to the contact by the sound of things. have you used a multimeter to measure the electrical contacts and their voltage when off and when in use trying to retract.

have you check the power switching relay or is the winch wired direct to the battery ?
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

german guy

  • Guest
(No subject)
« Reply #2 on: May 04, 2008, 11:20:33 PM »
you probly need a new solenoid kit  :evil:
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #3 on: May 04, 2008, 11:26:40 PM »
check the remote. the switch might be fooked. otherwise i recon you are lookin at new solenoid set. try pg winches if you find you need parts.
Logged

kp

  • Guest
(No subject)
« Reply #4 on: May 05, 2008, 07:47:02 PM »
Cleggy we should have tried andys remote when it happened that would at least eliminated or confirmed the remote.
Logged

jimyj

  • Guest
(No subject)
« Reply #5 on: May 06, 2008, 09:46:16 AM »
Hi Cleggy , had the same problem with mine about 6mts ago , and yep it was the solenoid pack  :shock:
Logged

jeepey

  • Guest
(No subject)
« Reply #6 on: May 06, 2008, 09:51:08 AM »
you can buy the solenoids seperatly, they came to about £70 from abril on the ti, but i bet they are cheaper from PG winches

check your motor works properly in both directions 1st, you can bypass the solenoids by doing this process

Logged

normalbloke

  • Guest
(No subject)
« Reply #7 on: May 07, 2008, 08:10:38 AM »
We're loving that drawing!!!
Logged

cleggy

  • Guest
(No subject)
« Reply #8 on: May 07, 2008, 07:30:25 PM »
Cheers guys i'll let you no how i go on.
Logged

cleggy

  • Guest
(No subject)
« Reply #9 on: May 30, 2008, 06:54:57 PM »
I HAVE CHECKED THE MOTOR AND ALL IS FINE!!!!!!!!!!!!  :-D BECAUSE ITS NOT WORKING IN REVERSE DOES THAT MEAN I WOULD NEED TWO SOLENOIDS OR ALL FOUR???ANY IDEAS WOULD BE WOULD BE WELCOME!!!
Logged

Warthog

  • Bla, bla, bla....
  • Forum Member
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 1279
  • Proper Job!
(No subject)
« Reply #10 on: May 30, 2008, 09:01:53 PM »
Maybe an idea to replace it with an allbright type solenoid pack (£40) One unit controls forward and reverse, plus its small in comparison. Cheaper than the Warn packs and very popular as a replacement?

http://cgi.ebay.co.uk/HEAVY-DUTY-WINCH- ... m153.l1262

Devon4x4 have the wiring diagram for these type of packs in their tech section.
Logged

doublej

  • Guest
(No subject)
« Reply #11 on: May 30, 2008, 11:12:44 PM »
thanks warthog - ive been looking for one of those cheaper than 40 quid all week, seems like this is the best bet.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal