Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Rodb]

Silly questions time.
Ok I got my ATF+4 fluid sorted out, jeep dealer.

1. Do the Dana axles have a breather and if so is it a one way valve? Previous user suggested that the axle may have been in seawater so may have injested into axle.
2. Where to grease regularly?
3. Correct tyre pressures 33-35psi?
4. When changing the diff oil would it be reasonable to use Sikaflex sealant to stick the end plate back on. Or should I just use halfords instant gasket?
5. Dealership mechanic advised that I should put a diff lubricant from the dealership in with the new oil every time oil changed becaiuse of the LSD fitted. Does it matter which one first to get a better mix?

Sorry to ask what may appear stupid questions but I do not have an owners book with even the simple stuff in it.
So far changed radiator,fan belt, all brake discs and pads,handbrake shoes, So my running cost are about £2 per mile traveled plus fuel cost.



Any help or suggestions much appreciated.

[Bishops Finger]

Hi not stupid questions.....

[greggmo]

yes all axles have breathers and yes they do have a valve. but they can get water in via the tube seals or a duff breather. grease anywhare that has a nipple. 28/30psi is fine. you can just use silicone when putting the diff cover back on. when changing the rear diff oil you must use mopar friction modifier available from the steelership or oil specialy for lsd's. the front has no lsd.

[Jeepthang]

If you can get a Lubelocker gasket for the diff, I'd use that rather than RTV. It's a lot easier and less messy. Mike Pavelin normally sells them on Ebay but he doesn't seem to have any on there at the mo.
You could PM him to see if he has one.

[Nexus]

I used Lube Lockers when I originally changed the diffs on the TJ would never use them again as it was necessary to over torque the bolts in the cover to stop them dripping and even then they would still leak.  Only my two pennies worth Other people probably don't have an issue.  I now always use RTV to seal the covers and never get a problem.

Cheers
Nick

[Jeepthang]

I used Lube Lockers when I originally changed the diffs on the TJ would never use them again as it was necessary to over torque the bolts in the cover to stop them dripping and even then they would still leak.  Only my two pennies worth Other people probably don't have an issue.  I now always use RTV to seal the covers and never get a problem.

Cheers
Nick

Interesting. I've used LL's for the past two years and never had a problem with leakage. Did you ensure that all (and I mean 100%) the old RTV was removed from the pumpkin and cover before using the LL? Any chance that the pumpkin/cover might have a deep scratch that could cause a drip?

[Bubba]

i use red holymar on everything its super stuff

[Rodb]

Hey a blast from the past.
I haven't yused that stuff for 25 years is it still going? Always used it when rebuilding engines and boxes in the past.

I was talking on another site about outboard motor tuning and found that I still had my Gunsen "colourtune" and Carb balancer. Remember them anyone or am i just toooooooo old.

[Dave69]

i use the blue hylomar if it's good enough for assembly on jet engines then it should last on a jeep.

[Bubba]

blue is like   mayo lite   give me full fat   red any day

[greggmo]

i once filled a guys pocket with the blue stuff at work and when he stood up after dinner the plastic chair was stuck to his ass :lol: