July 09, 2025, 01:13:47 AM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
1996 2.5 TD Starting problem
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: 1996 2.5 TD Starting problem (Read 9222 times)
0 Members and 1 Guest are viewing this topic.
Andypandy
Guest
1996 2.5 TD Starting problem
«
on:
September 28, 2008, 07:16:01 PM »
Hi.Just Bought 2.5 td Cherokee 1996 as a non runner,was supposed to be a immobiliser fault. have got immobiliser working(I think) and the engine is turning over but not firing and I have found there is no fuel getting to the injectors but plenty at filter,any suggestions and what is the live wire to the injector pump to run a live to to check if ommobiliser is off.
Thanks Andy
Logged
greggmo
Founder
Guru
Guru: 2
Offline
Posts: 8230
(No subject)
«
Reply #1 on:
September 28, 2008, 09:38:41 PM »
maybe one for dr mike. welcome to birtys.
Logged
Bubba
"Cooter"
Marshal
Guru
Guru: 69
Offline
Posts: 21029
(No subject)
«
Reply #2 on:
September 28, 2008, 09:44:17 PM »
asuming it has one i would say the stop seloniod on the injector pump
Logged
trucks
shedric
cletus
mr whippy
I spent most of my money on alcohol, women and old iron........ the rest of it I just wasted.
The Smiths
Guru
Guru: 1
Offline
Posts: 1084
(No subject)
«
Reply #3 on:
September 28, 2008, 11:04:44 PM »
The injector pump pulls the fuel through the filter (not a pump in the tank) - so if there is fuel coming to the filter then the pump is pulling it - it also recirculates excess fuel back to the tank.
Is there any going to the injectors? - may need to loosen a feed to an injector to check - but be careful of high pressure fuel
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund:
http://www.justgiving.com/The-Smiths-2015
Bubba
"Cooter"
Marshal
Guru
Guru: 69
Offline
Posts: 21029
(No subject)
«
Reply #4 on:
September 29, 2008, 05:11:51 AM »
if there were no air leaks to allow the fuel to run back there would still be fuel present at the filter if there were a pump selonoid problem could it not be a problem with tthe master injector isnt there one with a wire on it
Logged
trucks
shedric
cletus
mr whippy
I spent most of my money on alcohol, women and old iron........ the rest of it I just wasted.
Andypandy
Guest
(No subject)
«
Reply #5 on:
September 29, 2008, 07:42:27 AM »
There is no fuel at the injectors and I also thought it could be fuel cut off but was hoping someone could post diagram of fuel circuit so I can check wiring.
Logged
Dave69
Club Member
Guru
Guru: 15
Offline
Posts: 9457
Vehicle: CJ-7 4.2 auto
Year: 1979
(No subject)
«
Reply #6 on:
September 29, 2008, 06:01:22 PM »
the fuel cut out is just a switched 12volt supply from the starter circuit so when you key off the fuel is cut. what you could do is just run a 12v supply from somewhere (battery) and then see if you have fuel at the injectors
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm
Andypandy
Guest
(No subject)
«
Reply #7 on:
September 30, 2008, 10:26:06 AM »
Thanks for all the advice,after stripping out a really crappy fitting of a Meta Alarm it turns out the previous owner had changed fuel filter and hadn't cleaned sediment bowl and system was full of air so now running.
Once again Thanks,speak to you all shortly.
Andy
Logged
Dave69
Club Member
Guru
Guru: 15
Offline
Posts: 9457
Vehicle: CJ-7 4.2 auto
Year: 1979
(No subject)
«
Reply #8 on:
September 30, 2008, 07:45:28 PM »
it's great when the solution is something as simple as a blocked filter bowl
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm
greggmo
Founder
Guru
Guru: 2
Offline
Posts: 8230
(No subject)
«
Reply #9 on:
September 30, 2008, 10:06:27 PM »
result
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
1996 2.5 TD Starting problem
Powered by
EzPortal
Go Up
Go Down