Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: rear axle end float.  (Read 7922 times)

0 Members and 1 Guest are viewing this topic.

Dave69

  • Club Member
  • Guru
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
rear axle end float.
« on: October 13, 2008, 09:11:00 PM »
got a bit of rear axle end float on the xj. left had wheel and the play is alot. what's the easiest way to sort this out ?

given that the axle is just a push in and retained by a c clip are there any shims etc that need to be installed/where ?
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #1 on: October 13, 2008, 10:15:02 PM »
as long as`the play is in and out and not up and down dont worry up and down you need a new bearing tis easy evan lard can do them
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Dave69

  • Club Member
  • Guru
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #2 on: October 14, 2008, 07:40:54 PM »
thanks for that, no up and down just in and out, what's an acceptable in and out movement. still source a new bearing and seal ready for fitment at some point
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #3 on: October 14, 2008, 07:55:26 PM »
up to  around 3mm
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Carlos Fandango

  • Guest
(No subject)
« Reply #4 on: October 14, 2008, 09:08:39 PM »
I took my axle to the local dealership and 3-5mm is normal
Logged

Dave69

  • Club Member
  • Guru
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #5 on: October 15, 2008, 05:06:16 PM »
i am surprised at that amount of travel
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

Carlos Fandango

  • Guest
(No subject)
« Reply #6 on: October 15, 2008, 07:56:36 PM »
so was I  :shock:

Thats why I took my axle to a dealership to show them and ask them to service / repair it and spoke to a mechanic, he said it was acceptable and all cherrys were the same  :smt102
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #7 on: October 15, 2008, 09:15:32 PM »
yup
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

gordy

  • Guest
(No subject)
« Reply #8 on: October 16, 2008, 11:35:13 AM »
FYI,  I had 1/4in end float when I fitted a Truetrac,  so much so it failed the MOT.  Had to thicken up the floating spacer to sort it.
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #9 on: October 16, 2008, 03:24:09 PM »
they had no reason to fail if there was no lift arses
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Mike Pavelin

  • Guest
(No subject)
« Reply #10 on: October 17, 2008, 08:25:44 PM »
Shouldn't have failed, the tester is a numpty.
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #11 on: October 17, 2008, 08:42:11 PM »
it doo pisss me off these chaps are meant to know stuff  not jackshit
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal