Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Newbie with a technical question!  (Read 7077 times)

0 Members and 2 Guests are viewing this topic.

pitsy

  • Guest
Newbie with a technical question!
« on: December 09, 2008, 08:13:27 PM »

Hi everyone!

I have just bought a Jeep GC 4.7 V8 Ltd, and have discovered a weird noise with it.....

When i turn around a left hand corner, there is a groaning noise, and a judder in the steering wheel...if I go dead dead slow, it doesn't happen, but any kind of normal speed it does.  I'm planning to take it to my local garage next week, but thought someone on here may be able to give me an idea of what it might be (and how much it may cost to fix!!!)  

thanks in advance!!

- anna
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #1 on: December 09, 2008, 08:43:35 PM »

Does it have QuadraDrive?
Logged

gazjeep

  • Marshal
  • Forum Member
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7280
  • Vehicle: TJ - Der Panzer - CBR
(No subject)
« Reply #2 on: December 09, 2008, 08:46:56 PM »

Think you need to tell folk the year of the car to be more helpful, Mike is then your man  :wink:
Logged
Taking ya girl to heaven & back

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #3 on: December 09, 2008, 09:03:52 PM »

is it in 2wd or 4wd.

rear axle or transfer box issue ????
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

pitsy

  • Guest
(No subject)
« Reply #4 on: December 09, 2008, 09:08:24 PM »

oops....idiot

It's a 2002  :-)  and its in 4wd
Logged

scrw

  • Guest
(No subject)
« Reply #5 on: December 09, 2008, 09:14:10 PM »

GC's are permy 4x4.
Is there a badge next to the gear lever that says Quadra-Drive?



if so do this test to see if the diff is playing up

http://www.wagoneers.com/WJ/tech/vari-lok-test.html
Logged

pitsy

  • Guest
(No subject)
« Reply #6 on: December 09, 2008, 09:19:13 PM »

wow - quite a test! thanks for your help....it is defo quadra drive, but i'm not sure i have the equipment to lift it off the ground ;-)
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #7 on: December 09, 2008, 09:57:09 PM »

doctor mike is the man for the later stuff but i would think its a front cv joint at fault
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Mike Pavelin

  • Guest
(No subject)
« Reply #8 on: December 09, 2008, 10:03:50 PM »

Make sure the transfer case has Mopar NV247 oil and the front axle has 75/140 synthetic gear oil with Mopar friction modifier in them.
Logged

scrw

  • Guest
(No subject)
« Reply #9 on: December 09, 2008, 10:12:22 PM »

I would think first off do the front oil, bet they haven't put the friction modifier in at the last change
Logged

pitsy

  • Guest
(No subject)
« Reply #10 on: December 10, 2008, 10:03:26 AM »

thanks so much for your help!  I'll check the oil out, but i forgot to explain properly in the first place.....the noise comes from the back, but the judder I can feel on the wheel when its almost on full lock....
Logged

scrw

  • Guest
(No subject)
« Reply #11 on: December 10, 2008, 10:39:50 AM »

Change axle & tc fluids first then, could be the cheapest fix, otherwise it will be the clutch pack in the axle ot the diff in the TC
Logged

pitsy

  • Guest
(No subject)
« Reply #12 on: December 17, 2008, 08:15:22 PM »

hello again

I took the Jeep in yesterday, and of course there was no noise when i took the mechanic out in it.  Anyway, he put it up on the ramp to have a look underneath, and showed me that the rear passenger side, erm, arm thingy has a bit of play, and it could need a new bush.

(totally over my head as you may be able to tell!!)

Anyway, he said that he thought that it wouldnt' be so easy to just replace the bush, as sometimes the arms bend too easily, so i'm best off changing the arm as well.  

Does this sound right? and if not, can anyone recommend a garage in the Slough/Uxbridge/Maidenhead area that may be able to help me?

many thanks in advance!
- anna
Logged

jgsmuzzy

  • Guest
(No subject)
« Reply #13 on: December 18, 2008, 12:24:25 AM »

Pitsy,

My 2001 GC judders on full lock when doing under 5mph.  This is caused by the abs system (I took it to a main dealer to ascertain the problem, apprently, the abs computer thinks that the outside wheel is slipping, so engages).  If the judder is in the front end on full lock, I have been assured that it is normal.

Hope this helps.

J
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #14 on: December 18, 2008, 07:51:54 AM »

Sounds like BS to me. The ABS does not operate unless you have your foot on the brake.
Logged

jgsmuzzy

  • Guest
(No subject)
« Reply #15 on: December 18, 2008, 11:35:42 AM »

Which you do have in an auto when parking.  I cannot parallel park at 10mph.
Logged

pitsy

  • Guest
(No subject)
« Reply #16 on: December 18, 2008, 01:38:25 PM »

thanks for your help guys, but like I say it's not juddering that is a problem, it's the load creaking/groaning noise that is apparently attributed to this bush?!
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #17 on: December 18, 2008, 05:19:51 PM »

the ABS should not work when you are turning to park the jeep even when riding on the brake.

what you could mistake this juddering for is:

when an auto is being driven slowly and the vehicle speed is slowed by the use of the brake and then the brake is applied enough to almost stop the jeep from moving forward what happens is the brakes grab the disks and the friction is then broken by the torque from the engine reuslting in a "graunching sound" and vibration through the brake pedal. This is not in any way the ABS cutting in, this "graunching" is perfectly normal and happens on every automatic car on the market. If a mechanic tells you it's the ABS working at this speed then ask for another mechanic who knows what the hell he's talking about.

brake graunch ( std term in automotive developement) cannot be cured or fixed, it is just something that happens with an automatic car. you can create the same symptoms on a manual but it is alot harder.

if you have a creaking suspension bush give it a good soaking with wd40 of a silicone spray and see if the creaking stops
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
(No subject)
« Reply #18 on: December 19, 2008, 09:26:27 AM »

If the worn bush needs replacing then get that done first. I would probably get a replacement arm from somewhere like Lighthouse Jeep, Mansfield 4x4 or another specialist supplier. The chances are they will be much cheaper than Jeep.

If the bushes are anything like those on a Cherokee you will save the money on labour costs as the original spec bushes are almost impossible to get out. Your mechanic will like you more for saving him the stress too  :wink:
Logged
Pages: [1]   Go Up
 

Powered by EzPortal