Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]   Go Down

Author Topic: leaf springs(problem)  (Read 7687 times)

0 Members and 2 Guests are viewing this topic.

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
(No subject)
« Reply #25 on: February 02, 2009, 01:44:07 PM »
As long as the locating pins that hold the spring packs together are fitted into the holes on the spring pads on the axle you have done all you need to do. Check the torque on the u-bolts after a few journeys and you should be done.

I'm glad it seems to have sorted itself out.
Logged

Davemate

  • Guest
(No subject)
« Reply #26 on: February 02, 2009, 01:58:17 PM »
thanks  :-D
Logged

scrw

  • Guest
(No subject)
« Reply #27 on: February 02, 2009, 04:25:35 PM »
axle is located in relation to body by the front leaf spring mounts and the studs on the spring seats, if the springs/bushes are okay you can't go wrong
Logged

Davemate

  • Guest
(No subject)
« Reply #28 on: February 03, 2009, 12:50:05 PM »
i was just a bit concerned that the Axel
may have twisted out of line
doing one side at a time
the u bolts on the other side would hold it place
but as i undone both side
i was a bit unsure
job done
case closed
thanks for all your help :lol:
Logged
Pages: 1 [2]   Go Up
« previous next »
 
Powered by EzPortal