Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: question  (Read 5678 times)

0 Members and 3 Guests are viewing this topic.

td marmo

  • Guest
question
« on: February 04, 2009, 10:33:21 AM »
Morning all can anyone tell me is it possible to fit a transfer box out of a 4 ltr to either 2.5 diesel or a 2.5 petrol all about the same year , and what if any mods does one need to do if this is possible regds Steve
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
(No subject)
« Reply #1 on: February 04, 2009, 10:44:22 AM »
The 2.5 petrol is a different box AX5 I believe.
Logged
"Not all those who wander are lost"

gazjeep

  • Marshal
  • Forum Member
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7280
  • Vehicle: TJ - Der Panzer - CBR
(No subject)
« Reply #2 on: February 04, 2009, 01:22:05 PM »
It is possible to fit to a diesel with some modification, Bart on Rocks & Ruts did it, don't think he had any long term issues, ain't seen him for a while though 8-).
Logged
Taking ya girl to heaven & back

Mike Pavelin

  • Guest
(No subject)
« Reply #3 on: February 04, 2009, 07:09:35 PM »
A 2.5 petrol has a different input spline count to the 4.0 and diesel.
Logged

td marmo

  • Guest
(No subject)
« Reply #4 on: February 05, 2009, 11:26:48 AM »
Quote from: "Mike Pavelin"
A 2.5 petrol has a different input spline count to the 4.0 and diesel.
that being the case Mike is it only possible to fit 4ltr transfer box to 2.5 diesel manual , I did have a 2.5 td se so that would have been the same would ? so it's not possible to convert a 2.5 petrol so that it can run in 4 wheel drive full time is it ?
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #5 on: February 05, 2009, 05:11:51 PM »
it probably could be done but would involve xfer box input shaft being swapped.

have a look on naxja as there might be more of a detailed writeup
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal