Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Torx bolts  (Read 6381 times)

0 Members and 1 Guest are viewing this topic.

Bishops Finger

  • Guest
Torx bolts
« on: March 07, 2009, 04:19:09 PM »
Any sneaky Birty advice for unscrewing some at the base of a TJ Windscreen?

Some have got rounded whist trying to undo them..

What sizes are they so I can source replacements...
Logged

Nosebolt

  • Guest
Re: Torx bolts
« Reply #1 on: March 07, 2009, 04:39:30 PM »
from memory they are torx T27, mine have been swapped out for stainless bolts that have normal allen socket heads.

i did have a few the same, rounded out, i used a metric allen socket, just over size, with a  1/4 drive and hammered it into the damaged torx socket.
Logged

The Smiths

  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 1084
Re: Torx bolts
« Reply #2 on: March 07, 2009, 10:12:38 PM »
Use a han impact wrench - a good hit normally frees it off
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund: http://www.justgiving.com/The-Smiths-2015

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Forum Member
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
Re: Torx bolts
« Reply #3 on: March 07, 2009, 10:32:15 PM »
Just done the hinge frame bottom ones on the YJ to put mirror mount there. Have replaced with allen head variety
Torx turned ok but so did nut on other side ended up with roll cage removal windscreen down and dashboard loosening to get speakers out to get hand and wrench down there..... 4 hrs of toil to release 4 torx bolts and replace.
Windscreen ones not too bad had to take them out to replace screen so brutalising the bastard was not an issue still had to drill 2 out tho. Best done under cover and in the warm.........!
Logged

ferretjuggler

  • Guest
Re: Torx bolts
« Reply #4 on: March 08, 2009, 12:58:58 AM »
I posted a thread on the IFSJA forum (or was it the 4WD Hardware forum?) with exactly the same title.

First reply I got stated " the man who invented torx bolts should be killed!"

A bit reactionary, but I'm inclined to agree in principle.

I'm thinking about using normal hex head bolts with conical washers/spacers under 'em on my screen hinges.
Logged

Sugarwitch

  • A bit nutty
  • Forum Member
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 188
Re: Torx bolts
« Reply #5 on: March 08, 2009, 12:37:49 PM »
i use a impact driver every time
Logged
good friends are hard to find  but i found loads

Nosebolt

  • Guest
Re: Torx bolts
« Reply #6 on: March 08, 2009, 12:38:30 PM »
Quote from: "ferretjuggler"
I posted a thread on the IFSJA forum (or was it the 4WD Hardware forum?) with exactly the same title.

First reply I got stated " the man who invented torx bolts should be killed!"

A bit reactionary, but I'm inclined to agree in principle.

I'm thinking about using normal hex head bolts with conical washers/spacers under 'em on my screen hinges.

my local stainless steel bolt shop (yes we do have them here) does countersunk imperial bolts with hex socket heads @ 40p each
Logged

Bishops Finger

  • Guest
Re: Torx bolts
« Reply #7 on: March 08, 2009, 06:27:26 PM »
Cheers guys

Thanx for the input...
Logged

Bishops Finger

  • Guest
Re: Torx bolts
« Reply #8 on: March 09, 2009, 12:42:01 AM »
Just bought a impact driver off da net.......its getting worrying this Jeep ownership... :idea:
Logged

gazjeep

  • Marshal
  • Forum Member
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7280
  • Vehicle: TJ - Der Panzer - CBR
Re: Torx bolts
« Reply #9 on: March 09, 2009, 08:02:59 AM »
Bish buys more tools  :shock:
Logged
Taking ya girl to heaven & back

Bishops Finger

  • Guest
Re: Torx bolts
« Reply #10 on: March 10, 2009, 10:37:44 PM »
2 turned up today.... :lol:
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal