Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Reassembling steering components after strip.  (Read 6922 times)

0 Members and 2 Guests are viewing this topic.

mikesknives

  • Guest
Reassembling steering components after strip.
« on: April 29, 2009, 11:04:17 PM »

Completely took apart the XJ's steering.  Had the box recoditioned and bought upgraded joints and bars.

So I have no reference for setting the steering and need to get it semi right to drive for an alignment check.

Any tips?

TIA

Mike
Logged

Jeepers XJ

  • Guest
Re: Reassembling steering components after strip.
« Reply #1 on: April 29, 2009, 11:15:05 PM »

Hi Mike

Im no expert but i would get a straight plank of wood from yer back wheels as they are fixed, line up best you can and that should be a good starting point.
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
Re: Reassembling steering components after strip.
« Reply #2 on: April 29, 2009, 11:30:28 PM »

the front is wider than the back so ya best to just eye up the wheels from a distance and when you are somewhere neer just stick a tape on the fornt inside and the compare it to the back end of the front wheel if ya know what i mean. 8-) also make sure its all done right cos you are playin with your steerin not yer stereo so be safe.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal