Topic: which pitman arm should i use? (Read 1392 times)

paulesc · « **on:** August 21, 2011, 08:07:05 PM »

ive got myself a replacenent steering box for my 98tj. it came from and xj. all looks the same apart from the xj pitman arm is longer.
the tj has a 2 to 3" lift, so i was wondering which pitman are would be best?

Dave69 · « **Reply #1 on:** August 21, 2011, 08:39:21 PM »

what your looking for ideally is the steering rod to be parallel with the track bar. not sure of the difference between the tj and the xj tho'

MOCAJ · « **Reply #2 on:** August 21, 2011, 08:50:27 PM »

i have xj pitmans on both of my TJ's and an xj box on one. Given the pain in the ass the arms are to remove i would fit the unit complete

isle of man · « **Reply #3 on:** August 21, 2011, 08:52:24 PM »

I concur...

Bubba · « **Reply #4 on:** August 21, 2011, 09:16:53 PM »

indeed

wildwood · « **Reply #5 on:** August 21, 2011, 11:26:11 PM »

ZJ pitman arm is used in US as its longer and therefore if you do hi steer mods you'll still get full lock left to right..... something I never had on the YJ .........

I found all this out after selling axles and going 1 ton............

I then decided to go full hydro..........

So I have a ZJ pitman arm drilled for 1 ton tre (tie/track rod ends) and weld in tube ends for 1 ton tre s if they are of use to anyone

paulesc · « **Reply #6 on:** August 22, 2011, 08:24:21 PM »

thanks for the info

any thoughts on bump steer?

Author Topic: which pitman arm should i use? (Read 1392 times)

paulesc

which pitman arm should i use?

Dave69

Re: which pitman arm should i use?

MOCAJ

Re: which pitman arm should i use?

isle of man

Re: which pitman arm should i use?

Bubba

Re: which pitman arm should i use?

wildwood

Re: which pitman arm should i use?

paulesc

Re: which pitman arm should i use?