Topic: Willo's Challenge Truck build "Project T-J" (Read 70938 times)

willo · « **Reply #300 on:** June 12, 2012, 09:35:40 PM »

Quote from: Bulldog67 on June 12, 2012, 08:20:59 PM

Jeep been in touch yet?

No, I have tried another method, and have another up my sleeve....

isle of man · « **Reply #301 on:** June 12, 2012, 09:38:11 PM »

Jeep don't give a shiet, I tried this route.

nomadsz · « **Reply #302 on:** June 13, 2012, 12:18:34 AM »

Quote from: Willo on June 12, 2012, 08:13:31 PM

Rear arms:

[attachment=2]

nice looking rear arms would like some long arms for the WJ once i am back in work or a clayton copy kit for my 4+ inch lift.

All this talk about electric winches and from what i can see the Giggle Pin are fairly costly. Would a hydraulic winch not be the best to run in a competition event as water etc is not such a problem. Or is that a different class please excuse my ignorance but i am curious on the pros and cons..

Great build and only just across the water from me.

willo · « **Reply #303 on:** June 13, 2012, 07:28:50 AM »

class would be the same, there are a few considerations to account for on hydraulic,

1) If you have a dead engine you have no winch
2) they are strong and will pull and pull and pull, not indicating any sign of weakness until something catastrophically snaps, at least with a leccy motor you will hear it slowing up.

It's all horses for courses really

willo · « **Reply #304 on:** June 13, 2012, 07:32:22 AM »

Quote from: isle of man on June 12, 2012, 08:28:30 PM

You going to fish tail that chassis weld?

judging by the angle of what goes where I'm guessing (but will check later) fish tailing or puddle welding isn't an option, lets hope that weld is strong enough.......time will tell

wildwood · « **Reply #305 on:** June 13, 2012, 11:20:02 AM »

Fishtailed and Rossette welded all my chassis joints or extension.......cos I didn't know how strong strong is........

but when you look at the factory welds you realize........ No worries

Always best to err on overkill

Delk · « **Reply #306 on:** June 13, 2012, 01:37:20 PM »

The back of a TJ is not so critical since all the suspension is up forward. If something does happen a quick spectator maybe able to make off with a new to them winch if they are fast!

willo · « **Reply #307 on:** June 13, 2012, 02:52:58 PM »

Quote from: Delk on June 13, 2012, 01:37:20 PM

The back of a TJ is not so critical since all the suspension is up forward. If something does happen a quick spectator maybe able to make off with a new to them winch if they are fast!

willo · « **Reply #308 on:** June 13, 2012, 06:51:49 PM »

I am gonna need me a new grill, I MUST have that Iconic front grill, which one shall I go for?

[attachment=1]

Nosebolt · « **Reply #309 on:** June 13, 2012, 06:57:10 PM »

gotta be a 7 slot and my fav are the late MB or CJ2a they also look closest to TJ size by those picks

willo · « **Reply #310 on:** June 13, 2012, 06:58:15 PM »

As I have a bit of a gap....

[attachment=1]

Don't forget motors and albrights gotta go in

Nice n low:

[attachment=2]

wildwood · « **Reply #311 on:** June 13, 2012, 08:03:10 PM »

Like those a lot.... Especially the smaller ones......but are they legal in the UK......... Great for pushing MILFs out the way tho

isle of man · « **Reply #312 on:** June 13, 2012, 08:08:04 PM »

Indeed a stinger - ACE these are...

willo · « **Reply #313 on:** June 15, 2012, 04:12:22 PM »

Fundraising today:

If anyone could direct link this it's be much appreciated!

Bloomin iphones
http://s1160.photobucket.com/albums/q494/VectisRacing/Facebook/Mobile%20Uploads/?action=view&current=526724_10150848701866841_2079410811_n.jpg&evt=vacuum_job_complete]
[url]http://s1160.photobucket.com/albums/q494/VectisRacing/Facebook/Mobile%20Uploads/?action=view&current=526724_10150848701866841_2079410811_n.jpg&evt=vacuum_job_complete[/url]

cuffm · « **Reply #314 on:** June 15, 2012, 05:21:16 PM »

Well done Willo, £25 added to your H4H collection... Hope you have a good turnout and your tin overflows... Donations can be made here.

wildwood · « **Reply #315 on:** June 15, 2012, 08:13:06 PM »

Quote from: Willo on June 13, 2012, 06:51:49 PM

I am gonna need me a new grill, I MUST have that Iconic front grill, which one shall I go for?

[attachment=1]

well now seeing as I posted that I was going MB from Jeep parts for £95 ........... But the week has taken that wedge in
Travel ins. And a paddock stand for the Kwak......I failed........ Till later

But we can't both have the MB treatment..... People will talk.

.. Or is it a race to MB......noses???

willo · « **Reply #316 on:** June 16, 2012, 11:31:12 AM »

Quote from: mikec on June 15, 2012, 05:21:16 PM

Well done Willo, £25 added to your H4H collection... Hope you have a good turnout and your tin overflows... Donations can be made here.

Mrs Willo did the counting last night and it turns out we managed to raise £430.83, so current pot is up to the £750 mark!

Bubba · « **Reply #317 on:** June 16, 2012, 06:50:29 PM »

well done dood

Panic mechanic! · « **Reply #318 on:** June 16, 2012, 06:59:07 PM »

yup well done, can't help looking at that pic and noticing the help for heroes banner on jeep then seeing the heroes sweets one in the shop window and my mind automatically associating the two for some mad reason.

willo · « **Reply #319 on:** June 16, 2012, 07:02:54 PM »

Quote from: wildwood on June 15, 2012, 08:13:06 PM

Quote from: Willo on June 13, 2012, 06:51:49 PM
I am gonna need me a new grill, I MUST have that Iconic front grill, which one shall I go for?

[attachment=1]

well now seeing as I posted that I was going MB from Jeep parts for £95 ........... But the week has taken that wedge in
Travel ins. And a paddock stand for the Kwak......I failed........ Till later

But we can't both have the MB treatment..... People will talk. .. Or is it a race to MB......noses???

My front clip is coming off and being re-built in toobe, so then I will have to find some slats

willo · « **Reply #320 on:** June 19, 2012, 07:46:58 PM »

Yup, definitely gonna have to find some slats to fit

[attachment=1]

What do we think? FSJ width Lowrider but on 35's TJ:

[attachment=3]

wildwood · « **Reply #321 on:** June 19, 2012, 08:24:41 PM »

Looking good

Bulldog67 · « **Reply #322 on:** June 19, 2012, 09:46:14 PM »

very fuckin shexy, kinda like what Im gonna be aimin for on the 7 but a tad more technologically advanced

isle of man · « **Reply #323 on:** June 20, 2012, 04:46:47 PM »

411 and 35's does not work young Jedi..

Bulldog67 · « **Reply #324 on:** June 20, 2012, 05:01:21 PM »

are you talking to me?

Author Topic: Willo's Challenge Truck build "Project T-J" (Read 70938 times)

nomadsz

Delk

Nosebolt

Panic mechanic!