Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: winch fitting anti roll bar problem  (Read 1916 times)

0 Members and 1 Guest are viewing this topic.

garryarnold

  • Guest
winch fitting anti roll bar problem
« on: January 25, 2013, 08:49:29 PM »

hi all i have a 1997 4.0 tj which i am fitting a winch to i have a winch plate and want to mount it as far back as possible which would mean removal off the anti roll bar which i dont have a problem with as a bit more axle articulation is good for trialing which is what the jeep is going to be used for i would say 20 % road use 80% off road just looking for other peoples opinions really?? many thanks in advance
Logged

willo

  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 3699
  • Vehicle: CJ7
  • Year: 1982
Re: winch fitting anti roll bar problem
« Reply #1 on: January 25, 2013, 08:50:32 PM »

chop it off, but make sure you take all the brackets off too on the axles etc
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: winch fitting anti roll bar problem
« Reply #2 on: January 25, 2013, 08:52:28 PM »

chop it off, but make sure you take all the brackets off too on the axles etc

I concur...
Logged
"Not all those who wander are lost"

MOCAJ

  • Club Member
  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 6366
Re: winch fitting anti roll bar problem
« Reply #3 on: January 25, 2013, 08:54:25 PM »

 :iagree:

i have run my TJ without a sway bar for months on end, more body roll but you get used to it

as Will said remove all bits for MOT, if its not there cant be tested  :icon_winkle:
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland

Cockney Boy

  • Guest
Re: winch fitting anti roll bar problem
« Reply #4 on: January 25, 2013, 09:01:26 PM »

Mmmmmm roll bar is there for a reason
Logged

garryarnold

  • Guest
Re: winch fitting anti roll bar problem
« Reply #5 on: January 25, 2013, 09:03:25 PM »

my mate is the mot man so that is not a problem have already removed it as i had a feeling and iff any off the members on here want to do some offroading in dorset let me know as we have lots off places and fun have had it in water 2 inchs up the bonnet
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: winch fitting anti roll bar problem
« Reply #6 on: January 25, 2013, 09:05:29 PM »

Mmmmmm roll bar is there for a reason


Only on the rear!!!!
Logged
"Not all those who wander are lost"

MOCAJ

  • Club Member
  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 6366
Re: winch fitting anti roll bar problem
« Reply #7 on: January 25, 2013, 09:16:46 PM »

Rich,

run around without it attached for a week or two, its no biggie  :icon_winkle:
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland

Cockney Boy

  • Guest
Re: winch fitting anti roll bar problem
« Reply #8 on: January 25, 2013, 09:45:26 PM »

Rich,

run around without it attached for a week or two, its no biggie  :icon_winkle:

I'll leave it connected cheers  :icon_biggrin:
Logged

Delk

  • Guest
Re: winch fitting anti roll bar problem
« Reply #9 on: January 25, 2013, 09:46:10 PM »

People are amazed my jeep stays upright around corners without the roll bars. After a few days you don't care, after a few months you don't notice and after a few years you don't remember.
Logged

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
Re: winch fitting anti roll bar problem
« Reply #10 on: January 25, 2013, 09:46:33 PM »

 :imwitstupid:
Logged

Bulldog67

  • Arthur Daley: Graduated
  • Guru
  • *
  • Guru: -936
  • Offline Offline
  • Posts: 25395
  • Vehicle: Man Sized Old Iron
  • Anti Colour Truck Mafia - I'm The Fuckin Daddy
Re: winch fitting anti roll bar problem
« Reply #11 on: January 25, 2013, 09:53:50 PM »

my mate is the mot man so that is not a problem have already removed it as i had a feeling and iff any off the members on here want to do some offroading in dorset let me know as we have lots off places and fun have had it in water 2 inchs up the bonnet


sound good  :greggmo:

you can be our new dorset weekender organiser  :003:

admiteedly i aint done much more than 500 miles but the Chief lost its anti roll bars and I never noticed a smidge of difference
Logged
Bulldog's 22+ trucks: http://www.birtydastards.com/frm/index.php?topic=20288.0 :025:                                   :headbanger: 401 Dog * 401 Molotov :headbanger:  
Civilise the mind but make savage the body  :027:           Im only responsible for my karma :059:

garryarnold

  • Guest
Re: winch fitting anti roll bar problem
« Reply #12 on: January 25, 2013, 10:02:04 PM »

 :ace: no problem we have muddy lanes and deep fords down this way if ever you want to venture down
Logged

robsrotti

  • Guest
Re: winch fitting anti roll bar problem
« Reply #13 on: January 25, 2013, 10:30:46 PM »

my mate is the mot man so that is not a problem have already removed it as i had a feeling and iff any off the members on here want to do some offroading in dorset let me know as we have lots off places and fun have had it in water 2 inchs up the bonnet

Does your mate want to start a good line of Birty trucks to MOT.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal