May 12, 2025, 07:15:59 PM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
3" lift pucks
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: 3" lift pucks (Read 2473 times)
0 Members and 2 Guests are viewing this topic.
Sahara-Paul
Guest
3" lift pucks
«
on:
February 07, 2013, 05:11:06 PM »
When putting 3" pucks on a standard TJ Will standard shocks still work? Or do I need to install longer shocks? Basically I want a 3" budget lift or the largest without changing shocks
Logged
JamesH
Club Member
Guru
Guru: 1
Offline
Posts: 4998
Vehicle: JK
Year: 2010
Re: 3" lift pucks
«
Reply #1 on:
February 07, 2013, 05:21:11 PM »
Spacer lifts really are a cheap way of doing it and 3" lift by spacers seems mental to me but I freely admit I waste money on my Jeep. You will need to space the shocks as a minimum but why not treat the Jeep to at least some cheapo new shocks?
Logged
wildwood
The 1 Tonne Kid
Marshal
Guru
Guru: 14
Offline
Posts: 5921
Re: 3" lift pucks
«
Reply #2 on:
February 07, 2013, 05:33:07 PM »
I'm sure Rough Country do a packaged lift kit that does 1 1/4" body lift and 2" suspension lift for a few hundred.
Pucks and body lifts ideally should be as small as possible they are the weak link in the flexy brakey disaster squeaky what's that noise department
Logged
Sahara-Paul
Guest
Re: 3" lift pucks
«
Reply #3 on:
February 07, 2013, 05:41:49 PM »
Thanks for the info guys. i will look around for some kits on ebay. I will stick to 2" pucks. If I go down the pick route.
Logged
MOCAJ
Club Member
Guru
Guru: 4
Offline
Posts: 6366
Re: 3" lift pucks
«
Reply #4 on:
February 07, 2013, 05:52:10 PM »
better to get springs and shocks, best way to go. If you go pucks you will end up doing it in the long run
is your TJ totally stock ? If it is there are a couple of things you can do to improve your off roading before lifting or do you just want it to look taller on the street
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland
Sahara-Paul
Guest
Re: 3" lift pucks
«
Reply #5 on:
February 07, 2013, 05:57:47 PM »
I only want it to look better on the street to be honest. I use it to carry my motocross bike around and drive it offroad at bike events but not intending to offroad it on courses.
Logged
MOCAJ
Club Member
Guru
Guru: 4
Offline
Posts: 6366
Re: 3" lift pucks
«
Reply #6 on:
February 07, 2013, 06:03:20 PM »
first thing is fit 31" tyres on your stock wheels, you may have to adjust steering stops but its easy to do
if you still want more height then 2" pucks is cheapest way to do it unless you come across a second hand lift kit
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland
Sahara-Paul
Guest
Re: 3" lift pucks
«
Reply #7 on:
February 07, 2013, 07:35:34 PM »
What are the biggest width tyres
I can get on stock wheels please?
Logged
MOCAJ
Club Member
Guru
Guru: 4
Offline
Posts: 6366
Re: 3" lift pucks
«
Reply #8 on:
February 07, 2013, 07:39:26 PM »
assuming 15" standard rims (7.5") go for 31x1050x15
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland
JamesH
Club Member
Guru
Guru: 1
Offline
Posts: 4998
Vehicle: JK
Year: 2010
Re: 3" lift pucks
«
Reply #9 on:
February 08, 2013, 09:28:32 AM »
These can help - they extend your shock mounting point up and can be made or bought. An okay way to gain 1-2" and match the spacer.
[attachment=1]
I think 31x10.5x15 chunky tyres on standard wheels, a 1-1.5" spring spacer and maybe a 1" body lift would give you quite a transformed looking TJ that would be pretty good offroad too
Logged
Sahara-Paul
Guest
Re: 3" lift pucks
«
Reply #10 on:
February 08, 2013, 02:48:42 PM »
I've purchased some 2" spring spacers. Will I need to mod the shocks of will they stretch to fit?
Also can someone please explain how does the body lift work? Will I need to modify anything if I add a 1" lift here?
Cheers
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
3" lift pucks
Powered by
EzPortal
Go Up
Go Down