Topic: cj7 starter motor issue (Read 2448 times)

BIGDRY · « **on:** January 24, 2016, 08:56:20 PM »

Hi all, my new cj7 4.2 (well new to me!) has a dicky starter. It will spin but the pinion gear wont throwout to engage on ring gear.
Upon removal of the motor i found an external solenoid design that Ive never seen before - Am i correct in saying that it gets magnetised upon receival of current when turning the key which then engergised the solenoid to throw the pinion out. There also only one wire going to the motor? is this correct? Also in your experience is it better to get the oe motor referbed or by a newer motor? thx all.

5536paulj · « **Reply #1 on:** January 24, 2016, 09:02:58 PM »

You're right in your assumptions, I would get a new one, shouldn't be much more than £100, try Lighthouse

Paul

BIGDRY · « **Reply #2 on:** January 24, 2016, 09:54:17 PM »

Many thanks Paul for the clarification. - odd design tha tim sure theres a logical reason for? do they burn out then and loose their magnetism powers? thx

Dave The Sparky · « **Reply #3 on:** January 24, 2016, 11:24:51 PM »

You can be the guinea pig and buy one of these modern style starters and tell us if its okay?

?

Proper Starter Motor?

Bubba · « **Reply #4 on:** January 25, 2016, 06:30:31 AM »

standard ones are cheapish so try lighthouse or somtimes ebay yours has died how most do

and yes your original one is as god made it

Bulldog67 · « **Reply #5 on:** January 25, 2016, 09:32:57 AM »

Just got one from lightys - £90 ish

Author Topic: cj7 starter motor issue (Read 2448 times)

BIGDRY

cj7 starter motor issue

5536paulj

Re: cj7 starter motor issue

BIGDRY

Re: cj7 starter motor issue

Dave The Sparky

Re: cj7 starter motor issue

Bubba

Re: cj7 starter motor issue

Bulldog67

Re: cj7 starter motor issue