Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: YJ Streering problem  (Read 4979 times)

0 Members and 1 Guest are viewing this topic.

Nigel

  • Guest
YJ Streering problem
« on: May 26, 2006, 09:29:44 AM »
Hi Guys

Need some help. Failed MOT yesterday on the steering. The Jeep is still almost stock. Fitted bigger tyres and they rub against the leaf spring when on full lock. (plan to lift this year)

How do I sort this??

Nigel
Logged

Anonymous

  • Guest
(No subject)
« Reply #1 on: May 26, 2006, 09:37:38 AM »
adjust the steering bumpstops on the back of the hub carrier
Logged

chrisjones

  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
(No subject)
« Reply #2 on: May 26, 2006, 09:41:15 AM »
If you have a look just in front of the bottom ball joint, there is a bolt sticking out of the steering knuckle.  This is the steering stop.  It's got a locking nut on it which is spot welded to the bolt (set at factory).  You need to take them out, and put some washers behind the nut to adjust the stops.  It's a bit trial and error as to how many you may need.

You'll need to use plenty of WD40 type stuff on the bolts, and possibly some heat to get them out cos they're gonna be well and truly stuck. :wink:
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

Nigel

  • Guest
(No subject)
« Reply #3 on: May 26, 2006, 04:46:22 PM »
Cheers

Little job for the week-end
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal