Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Trolley jack, Axle stands?  (Read 7810 times)

0 Members and 1 Guest are viewing this topic.

Doodle

  • WTF
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 258
  • Vehicle: 60th Anniversary TJ, 2016 75th Anniversary Grand Cherokee
  • Year: 2001
Trolley jack, Axle stands?
« on: May 06, 2007, 01:34:10 PM »
Help,

I am looking at buying a trolley jack and some axle stands so i can lift the jeep on the drive and get the wheels off so i can do various bits but was thinking that it might not be the best thing.

Will axle stands work with a lifted jeep? will the trolley jack work that high or will i still need to put a block of wood on it?

My jeep has a 3.5" lift and a set of 33 tyres on.

basically i want to lift if safely and be able to sit there comfortably for a while with no wheel on etc!
Logged
If your grandmother or any other member of your family should die whilst in the shelter, put them outside but remember to tag them first for identification purposes.

cherokeegraham

  • Guest
(No subject)
« Reply #1 on: May 06, 2007, 02:34:11 PM »
They will if you buy BIG ones!
Logged

Doodle

  • WTF
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 258
  • Vehicle: 60th Anniversary TJ, 2016 75th Anniversary Grand Cherokee
  • Year: 2001
(No subject)
« Reply #2 on: May 06, 2007, 02:49:47 PM »
And what is a big one?   :?
Logged
If your grandmother or any other member of your family should die whilst in the shelter, put them outside but remember to tag them first for identification purposes.

Tank

  • Guest
(No subject)
« Reply #3 on: May 06, 2007, 06:04:38 PM »
There are 4x4 high lift jacks you can buy but they arent so good for lifted jeeps.I use a hi-lift jack to raise my jeep,then blocks underneath although some big heavy duty axles stands will do as long as they have the reach,perhaps lorry ones.You could try a big bottle jack as well as these raise to a good height
Logged

Manda

  • AKA Dangerous Doris
  • Founder
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 3322
(No subject)
« Reply #4 on: May 06, 2007, 06:08:49 PM »
Get yourself down to Machine Mart, they done some big axle stands
Logged
AKA Dangerous Doris

Dave69

  • Club Member
  • Guru
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #5 on: May 06, 2007, 06:14:37 PM »
std axles stands are not high enough, even with blocks the stands will be almost on maximum and that is not a good idea. (been there done it). fitting 3.5" of lift on std axle stands is not fun
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

Warthog

  • Bla, bla, bla....
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 1279
  • Proper Job!
(No subject)
« Reply #6 on: May 06, 2007, 06:29:43 PM »



Machine Mart 3 Tonne Axle stands and 3 Tonne Trolley jack. Get yerself down on one of their VAT Free days, save a few pennies.

Used on Asylums 4" Lift etc

Some good bocks of Reclaimed wood can give you that extra height if needed. We normally stack the tyres under the Belly plate if left for a long period. Just for a bit extra safety.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal