Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Spare wheel hanger?  (Read 4839 times)

0 Members and 1 Guest are viewing this topic.

Doodle

  • WTF
  • Forum Member
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 258
  • Vehicle: 60th Anniversary TJ, 2016 75th Anniversary Grand Cherokee
  • Year: 2001
Spare wheel hanger?
« on: June 14, 2007, 08:15:10 PM »
Guys,
For those that are running the larger than standard tyres how have you mounted the spare on your rig?
Logged
If your grandmother or any other member of your family should die whilst in the shelter, put them outside but remember to tag them first for identification purposes.

Sam

  • Guest
(No subject)
« Reply #1 on: June 14, 2007, 10:11:53 PM »
mines either at the bottom of the garden  :roll:

no good no my roofrack like some peeps carry em - i can barely lift it off the floor never mind go climbing with it :(
Logged

Manda

  • AKA Dangerous Doris
  • Founder
  • Forum Member
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 3322
(No subject)
« Reply #2 on: June 14, 2007, 10:36:00 PM »
I've got my 33x12.50 on a Bestop swing out tyre carrier.



http://www.4wd.com/productdetails.aspx?pid=6196001
Logged
AKA Dangerous Doris

Mort

  • Guest
(No subject)
« Reply #3 on: June 15, 2007, 11:01:35 AM »
On my TJ I have a Warn rear tyre carrier, fitted to Warn rear bumper.  

You can remove the studs from the stock tyre carrier, then fit longer studs and some penny washers to move the larger tyre away from the tailgate. You can also fit a wheel spacer, which will do the same thing.  I wouldn't suggest going larger than 33" using this method, as it'll put strain on the tailgate hinges.

For an XJ, lay it down flat in the boot and strap it down, or fit to roof bars using a ladder lock.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal