Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: xj rear diff  (Read 9648 times)

0 Members and 1 Guest are viewing this topic.

brk

  • Guest
xj rear diff
« on: June 04, 2005, 09:52:25 PM »
Hi guys just after a bit of advice on my rear diff, pulled cover off to change oil and found 2 pieces of wire that look like parts of the clips that hold the clutche plates in,so had a closer look with light and it appears that outside plate on clutch plates is in about 3 pieces, is this ok.Diff seems to be working ok no bad noises . everything else appears ok, If this is a prob I guess its a diff out job Any thoughts? thanks from NZ Rugby capital of the world
Logged

Anonymous

  • Guest
(No subject)
« Reply #1 on: June 04, 2005, 10:29:00 PM »
brk......I thought Leeds Rhinos was the rugby capitol of the world :D

That said hi to a birty from the other side of the world

I trust Dr Mike  + others will respond soon with relavent teccy advice
Logged

greggmo

  • Founder
  • Guru
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #2 on: June 07, 2005, 12:35:03 AM »
mmm dificult one, could be the c clips. i think bubba might have an idea what it could be.
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #3 on: June 07, 2005, 07:09:54 AM »
If the discs are breaking up, you need to replace them 'cos you don't want bits of metal floating around in there. You can do it yourself if you are a competent home mechanic if you make up a tool to compress the clutch packs for reassembly and have a sturdy workbench and vice. The clutch packs are about £120 from Jeep. The wire is probably part of the retainers foe a clutch pack, the C-clips are 4mm thick steel and the driveshafts would slip out of the diff if these had gone.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal