Topic: Cherokee won't Start (Read 8790 times)

Woody · « **on:** July 15, 2005, 05:53:52 PM »

My 95 4.0Ltr Auto XJ refused to start this morning

Ok before people go "not again" I have already done the following:

Fault Codes 12, 11 & 55, it is the 11 that appears to be cause - either the Crankshaft Position Sensor or the Camshaft Position Sensor has packed up.

Having searched the forums I have already checked that I have no spark and I do have fuel pressure as described by Mike in this post http://www.jeepclub.co.uk/topic.cfm?ID=3847 so my conclusion is that the Crank Sensor is at fault.

What I really need to know is where do I find the Crank Sensor and is it an easy DIY job to change or should I just bite the bullet and tow the XJ round to MDG? Well at least I still have the Wrangler so I am not Jeepless

thanks in advance

Woody

Anonymous · « **Reply #1 on:** July 15, 2005, 06:12:12 PM »

Woody

Hitch a ride on a thread in the general section entitled Dr Mike (Yup him)

Mick O's going through similar woes at the moment so you should get some help there

I've also just remembered Steve Wright (Off roading.net) had similar problems last summer

Good luck

Stew

Woody · « **Reply #2 on:** July 15, 2005, 06:44:57 PM »

Stew

cheers for the tip, looks like Mick O had more fault codes than me. Will wait to see if he has any suggestions or tips.

Like the Springsteen signature

Woody

Mike Pavelin · « **Reply #3 on:** July 15, 2005, 07:30:47 PM »

It's usually crank sensor. easy to change you can find it on top left of bellhousing, access from under the jeep. They're about 70 quid I think.

Anonymous · « **Reply #4 on:** July 15, 2005, 07:56:08 PM »

just swap it, they throw up wierd codes when the cps goes, I spent ages chasing faults that weren't there, seems some circuits dont fire up if the cps is bad and you can get their fault codes and not the cps and the ecu doesnt get that far, I did have a flow diagram of the ecu startup logic will see if I can find it

daggie · « **Reply #5 on:** July 16, 2005, 06:55:36 AM »

try kicking it

Mick O · « **Reply #6 on:** July 16, 2005, 08:54:55 AM »

Woody

The sensor is as Mike said, top left on the bell housing.

I couldn't get at mine from the top, had to drop the front prop to get at it from underneth.

Havent tried mine yet, found a problem with the rotor arm and had to get a new one.

Anonymous · « **Reply #7 on:** July 16, 2005, 01:07:17 PM »

Woody your avatars doing my head in!

Whats the song the lines from!?

Woody · « **Reply #8 on:** July 16, 2005, 02:02:00 PM »

Stew

how can I make a madman crazier

Woody

Anonymous · « **Reply #9 on:** July 16, 2005, 02:15:30 PM »

Ah no wonder I couldn't get the lyric :shock:

FWIW I've got a cd changer in the glove box between the seats if thats of any use

Woody · « **Reply #10 on:** July 16, 2005, 03:42:22 PM »

Stew

thought about that but the MP3 player seems a cheaper and simpler option.

Woody

Woody · « **Reply #11 on:** July 17, 2005, 03:00:00 PM »

Mick O

cheers for the hint on the front prop helped immensly. Thanks to all the rest who told me where to find the lil' bugger. It is a bit of a bitch to get to with a socket set when lying on your back under the car. It's off now just need the replacement and refitting to hopefully get the XJ running again.

Woody

Mick O · « **Reply #12 on:** July 18, 2005, 08:35:54 AM »

Mines up and going again :shock: so a new one of them too

Big thanx for the input guys

chrisjones · « **Reply #13 on:** July 18, 2005, 09:38:34 AM »

That's good news! :smt023

Author Topic: Cherokee won't Start (Read 8790 times)

Woody

Cherokee won't Start

Anonymous

(No subject)

Woody

(No subject)

Mike Pavelin

(No subject)

Anonymous

(No subject)

daggie

(No subject)

Mick O

(No subject)

Anonymous

(No subject)

Woody

(No subject)

Anonymous

(No subject)

Woody

(No subject)

Woody

(No subject)

Mick O

(No subject)

chrisjones

(No subject)