Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: brake issues  (Read 5703 times)

0 Members and 1 Guest are viewing this topic.

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
brake issues
« on: October 07, 2008, 08:14:42 PM »

starting to lose brake effort on the xj. the meaning of losing the brake effort is that the brakes work fine with no fluid loss. the brake pedal has effort but when pressed and held i.e sitting at traffic lights the brakes slowly release unless the pedal is slowly pushed further down. when the pedal if fully pressed so it is acting solely on the master cyclinder the brakes work fine and no pressure is lost and stopps the jeep relatively quickly

i have checked the manifold to brake boost servo pipe and that keeps a vacuum (will still replace it for a new pipe), i have a spare master cylinder that i might fit but unsure as to where the air leak is. i feel i might need an good replacement brake booster unit. i've heard the grand unit works and might be slightly better.

also anyone got a diagram for the brake pipes when the abs unit is removed, mine isn't working so i see no point in having it (try stopping in snow with abs)


am i looking in the right place for the air leak ?
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #1 on: October 07, 2008, 08:27:11 PM »

I had that on my XJ - new master cylinder required.
Logged

daggie

  • Moderator
  • Forum Member
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
(No subject)
« Reply #2 on: October 07, 2008, 09:42:48 PM »

he's right
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

eastryjeep

  • Guest
(No subject)
« Reply #3 on: October 08, 2008, 12:24:52 PM »

Yup, new or recon master cylinder needed - trouble is, the increased efficiency may soon start leaks further down stream, just watch your wheel cylinders for signs of weeping for a while.

Dont bother wasting time just doing the seals in the master cyl. as the bore tends to be pitted and will tear your new rubbers to shreds.
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #4 on: October 08, 2008, 05:44:31 PM »

Master cylinder if you have no visible leaks.
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #5 on: October 08, 2008, 06:41:31 PM »

wasn't sure, i have a spare so give that a try. cant be any worse.

thanks
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm
Pages: [1]   Go Up
 

Powered by EzPortal