Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Gearbox  (Read 7102 times)

0 Members and 1 Guest are viewing this topic.

Anonymous

  • Guest
Gearbox
« on: July 24, 2005, 06:03:38 PM »
Alright fellas! 2nd 3rd and 4th gear are all notchy and grinding. Im told that there is a common problem with the 'Synchros' on these box's and that they need replacing! Since I have no idea what any of that means i figure I will see if I can find new gearbox!
So are ZJ boxes all the same? and will a cherokee box fit in a ZJ?
And if any of you lot trip over one on your travels let me know. :D
Logged

Anonymous

  • Guest
(No subject)
« Reply #1 on: July 24, 2005, 09:59:08 PM »
OwenDon't know much on slush boxes but you could try Charlton Auto recyclers in Duxford for a S/H one

Also think theres Coventry Transmissions been mentioned plus EDM in Bicester

As your computers been acting up did you ever get my pm ref polythene sheet to keep the goo out of your rad?
Logged

Dingo

  • Guest
(No subject)
« Reply #2 on: July 25, 2005, 03:02:56 AM »
Have you checked your clutch housing is not full of crud? It could well be that your shaft is cruded up and it's preventing your thrust bearing fom moving all the way along, so your clutch is still half engaged whilst your trying to put it in gear. I would have thought it unusual for all the syncro's to play up at the same time, but then what do I know. Dr mike might have a better idea and would know whether an xj box will fit.
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #3 on: July 25, 2005, 06:09:03 AM »
with ya there dingo
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Mike Pavelin

  • Guest
(No subject)
« Reply #4 on: July 25, 2005, 07:40:32 AM »
As well as the mud in clutch issue, (I've had some of that) the clutch hydraulics are none too reliable on Jeeps, and thirdly, the clips on the clutch fork which secure the release bearing can break, allowing the bearing to become unseated.
A diesel ZG(ZJ) will have an AX15 transmission, which should be the same as an XJ diesel or 4.0 YJ or TJ.
Logged

Anonymous

  • Guest
(No subject)
« Reply #5 on: July 25, 2005, 08:52:12 AM »
Well the clutch and bearing are only 2 weeks old and I assume that the clutch housing was checked before it was put on. And I tried cleaning out the housing with a jethose through the gap but it was just clean water that flowed back out.
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #6 on: July 25, 2005, 09:03:40 AM »
Do you have difficulty selecting 1st from a standstill?
Logged

Anonymous

  • Guest
(No subject)
« Reply #7 on: July 25, 2005, 09:54:06 AM »
No not at all! 1st slides straight in everytime :?  :?
Logged

Anonymous

  • Guest
(No subject)
« Reply #8 on: August 02, 2005, 04:22:31 PM »
OOooooo i been offered a gearbox from a breakers for £350
Is that a reasonable price for a used box or is it expensive? :?  :?  :D
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal