Topic: What psi for road use on 31 khumo tyres? (Read 5927 times)

blamblam · « **on:** December 05, 2008, 09:32:43 AM »

What is the general opinion on what kind of PSi should i should be running, couple of my tyres look abit low but i'm clueless as to what they should be...i've also noticed my avg fuel consumption has gone up recently..

Bubba · « **Reply #1 on:** December 05, 2008, 05:34:58 PM »

scrw · « **Reply #2 on:** December 05, 2008, 05:40:03 PM »

you can work it out off the sidewall.
Work out the load on each tyre then look at the max load & pressure on the tyre, the psi you need will be a percentage of that.

Eg (made up figures)
tyre says 500kg at 50psi max and the wheel loading is 250kg then you need 25psi etc etc

Mick O · « **Reply #3 on:** December 05, 2008, 06:27:01 PM »

Or.........................

28

8-)

scrw · « **Reply #4 on:** December 05, 2008, 07:30:35 PM »

how can you say that not knowing the jeep its on?

Mike Pavelin · « **Reply #5 on:** December 05, 2008, 07:44:02 PM »

Experience.

28.

Dave69 · « **Reply #6 on:** December 05, 2008, 08:29:08 PM »

or you could try the std 30 since most garage tyre inflators are not correct.

run at the pressure and check the tyre wear pattern, not much help with all this wet stuff on the road so stick with 28

greggmo · « **Reply #7 on:** December 05, 2008, 11:39:23 PM »

yup 28-30 works just right. 8-)

Author Topic: What psi for road use on 31 khumo tyres? (Read 5927 times)

blamblam

What psi for road use on 31 khumo tyres?

Bubba

(No subject)

scrw

(No subject)

Mick O

(No subject)

scrw

(No subject)

Mike Pavelin

(No subject)

Dave69

(No subject)

greggmo

(No subject)