Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: 96 Grand Cherokee axles  (Read 8431 times)

0 Members and 1 Guest are viewing this topic.

Stig of the dump

  • Guest
96 Grand Cherokee axles
« on: February 01, 2009, 12:08:24 PM »
Hi

Both my axles needs replacing / repairing. The rear was making a bearing noise and now clunks and grinds and is undriveable. The front has had the cv joints removed and the halfshafts left rattling about in the axle.

What is the most cost effective repair? Should I buy a breaker on ebay, buy all the shafts and gears, or scrap this motor and buy another?

Will replacing all the internals fix the axles or is case damage likely?
Logged

garyf

  • Guest
(No subject)
« Reply #1 on: February 01, 2009, 01:50:52 PM »
just buy a breaker and swap everything over
Logged

Tank

  • Guest
(No subject)
« Reply #2 on: February 01, 2009, 02:48:22 PM »
Heres a front one on Ebay might end up going cheap

http://cgi.ebay.co.uk/jeep-grandcheroke ... 240%3A1318
Logged

Tank

  • Guest
(No subject)
« Reply #3 on: February 01, 2009, 02:49:57 PM »
Logged

Tank

  • Guest
(No subject)
« Reply #4 on: February 01, 2009, 02:57:14 PM »
Logged

Stig of the dump

  • Guest
(No subject)
« Reply #5 on: February 01, 2009, 03:15:25 PM »
Thanks for that.

I already contacted the one with the front axle, but he's sold the rear. I think the rear axle might be too new for mine, but not really sure. The whole car is probably better than mine, it might be better to swap my LPG over.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal