Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Jack Stowage - Thread insert in floor missing.  (Read 11020 times)

0 Members and 1 Guest are viewing this topic.

Flightmech

  • Guest
Jack Stowage - Thread insert in floor missing.
« on: February 05, 2009, 07:07:39 PM »
Hello all,

New member here. Great forum.

I have a 2004/54 Cherokee KJ 2.5CRD Ltd. Where the jack/tool stowage is under the rear passenger seat, the threaded insert that the case screws into is missing (the threaded bolt just sits in the hole ). Vehicle has just been into the dealership for a new key and remote but they said they couldn't find the part number when i asked. Anybody with a manual help??

Many thanks

Flightmech
Logged

tim_aka_tim

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #1 on: February 05, 2009, 07:40:07 PM »
Which bit is it?

Logged

Flightmech

  • Guest
(No subject)
« Reply #2 on: February 05, 2009, 07:46:17 PM »
Quote from: "tim_aka_tim"
Which bit is it?



Bloody hell, that was quick. Its the clip nut that the whole stowage screws into in the floor pan (as shown in the top diagram). Lancaster Witham said they couldn't find the number for it??

Thanks!
Logged

tim_aka_tim

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #3 on: February 05, 2009, 07:48:37 PM »
Which number is it on the diagram? Then we can get you the part number.
Logged

Flightmech

  • Guest
(No subject)
« Reply #4 on: February 05, 2009, 07:53:17 PM »
It's not one of the numbered items. Its the small seperate clipnut that goes in the floor plan hole that the whole stowage screws into. (Its shown in the upper diagram)
Logged

Panic mechanic!

  • Guest
(No subject)
« Reply #5 on: February 05, 2009, 08:02:49 PM »


this bit here?
Logged

tim_aka_tim

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #6 on: February 05, 2009, 08:06:09 PM »
Looks like it could be part of number 4.

52128755AA - Bracket and locator, Screw jack clamp
52129757AA - Bracket and locator, Bottle jack clamp

Decide if you have a screw jack or bottle jack. It will be the whole thing, just so you can get the bit you need. Bummer.

Please check with the dealer first, their parts system might give a clue.
Logged

Flightmech

  • Guest
(No subject)
« Reply #7 on: February 05, 2009, 08:24:04 PM »
Quote from: "Panic mechanic!"


this bit here?


Yes, thats the bit!
Logged

Flightmech

  • Guest
(No subject)
« Reply #8 on: February 05, 2009, 08:24:46 PM »
Quote from: "tim_aka_tim"
Looks like it could be part of number 4.

52128755AA - Bracket and locator, Screw jack clamp
52129757AA - Bracket and locator, Bottle jack clamp

Decide if you have a screw jack or bottle jack. It will be the whole thing, just so you can get the bit you need. Bummer.

Please check with the dealer first, their parts system might give a clue.


Thanks Tim, it's the screwjack I have. Cheers
Logged

bone idle

  • Guest
(No subject)
« Reply #9 on: February 06, 2009, 11:17:26 PM »
You might be able to get a Rivnut to fit, it depends on the size of the bolt and the diameter of the hole. A rivnut as the name sugests is like a pop rivit but with a nut in it . As you pull up on the nut it expands like the pop rivit so the hole size is important.
Hope this helps   :-D
P.S. If you work in a factory talk to the maintenance . If they cant help you,ld have to go to a wholesaler where you get nuts and bolts.
Logged

Flightmech

  • Guest
(No subject)
« Reply #10 on: February 07, 2009, 05:35:25 PM »
Quote from: "bone idle"
You might be able to get a Rivnut to fit, it depends on the size of the bolt and the diameter of the hole. A rivnut as the name sugests is like a pop rivit but with a nut in it . As you pull up on the nut it expands like the pop rivit so the hole size is important.
Hope this helps   :-D
Logged

gazjeep

  • Marshal
  • Guru
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7282
  • Vehicle: TJ - Der Panzer - CBR
(No subject)
« Reply #11 on: February 07, 2009, 05:41:06 PM »
Had a look on eBay ?

Seem to be a few for sale  :wink:
Logged
Taking ya girl to heaven & back
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal