Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: fitting new plates to my lsd  (Read 1802 times)

0 Members and 1 Guest are viewing this topic.

paulesc

  • Guest
fitting new plates to my lsd
« on: April 12, 2010, 05:39:26 PM »

i done a bit of froading last week a got quickly stuck  :(
the lsd on my 2.5l 94 yj seems to be worn out. I have done some searching on the subject, but im not having  a lot of luck. its done 87000 miles.
can anyone tell me what kind of job it is to change the plates and are there any online instuctions?
Logged

sprintagogo

  • Guest
Re: fitting new plates to my lsd
« Reply #1 on: April 12, 2010, 08:30:06 PM »

I contemplated doing this to my Dana 35 rear axle at one point and even went as far as buying the plates and LSD additive, but before I got around to it I replaced the axle with something stronger. I reckon it can be done without removing the carrier from the axle housing with just the axle shafts pulled, but I could be wrong.

Some good pointers here-

www.jedi.com/obiwan/jeep/traclok.html

And although it is not the same axle/lsd unit the principals are similar here-

www.angelfire.com/oh5/cpa5oh/cpa5ohtech018.htm

The clutch plates are put under pressure by a domed spring washer on each side, I believe these pressure washers/plates are called belleville washers or something similar. Usefull info about removing the half-shafts here - www.birtydastards.com/frm/index.php?topic=10780.0
Logged

paulesc

  • Guest
Re: fitting new plates to my lsd
« Reply #2 on: April 13, 2010, 05:23:07 PM »

thats great info, thanks :)
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: fitting new plates to my lsd
« Reply #3 on: April 13, 2010, 06:45:15 PM »

just to be evil it is my opinion that the standard lsd aint worth spending cash on  if you are int offroding fit a lunch box locker for cussedness  and low cost and if you do a lot of road but still offroad and and have a bit of cash go true trac
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

paulesc

  • Guest
Re: fitting new plates to my lsd
« Reply #4 on: April 13, 2010, 07:07:24 PM »

what sort of  price is a true trac in the UK?
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: fitting new plates to my lsd
« Reply #5 on: April 13, 2010, 10:17:17 PM »

not sure gaz just had to buy some
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
Re: fitting new plates to my lsd
« Reply #6 on: April 13, 2010, 10:22:32 PM »

aussie lockers are cheap and have good reviews
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: fitting new plates to my lsd
« Reply #7 on: April 13, 2010, 10:37:01 PM »

i very much like the richmond no slip
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

gazjeep

  • Marshal
  • Forum Member
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7280
  • Vehicle: TJ - Der Panzer - CBR
Re: fitting new plates to my lsd
« Reply #8 on: April 13, 2010, 10:40:16 PM »

http://www.ringpinion.com/ProductDetails.aspx?ProdID=4424

Based on a Dana 35 rear $386

Trust me, ring Randy's Tech bloke, Brian Train, he will not bite & will not sell you stuff you dont need

http://www.ringpinion.com/Sales.aspx

& BTW, if you want it fitted, have a word with Bubba aka MJS (Morris Jeep Specialists)
Logged
Taking ya girl to heaven & back

gazjeep

  • Marshal
  • Forum Member
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7280
  • Vehicle: TJ - Der Panzer - CBR
Re: fitting new plates to my lsd
« Reply #9 on: April 13, 2010, 10:40:56 PM »

i very much like the richmond no slip

Now ya bloody tell me  :hysterical: :hysterical:
Logged
Taking ya girl to heaven & back

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: fitting new plates to my lsd
« Reply #10 on: April 13, 2010, 10:42:30 PM »

sorry gaz no good for a you its abit like me cheap rugged and reliable
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

gazjeep

  • Marshal
  • Forum Member
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7280
  • Vehicle: TJ - Der Panzer - CBR
Re: fitting new plates to my lsd
« Reply #11 on: April 13, 2010, 10:46:12 PM »

Thats alright then, I can live with that  :icon_winkle:

True Trac = sophisticated, much like oneself..... not  :003: :003:
Logged
Taking ya girl to heaven & back

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: fitting new plates to my lsd
« Reply #12 on: April 13, 2010, 10:51:00 PM »

indeed a true trac like ya self ....smooth inpacable manners and there when you need it
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

gazjeep

  • Marshal
  • Forum Member
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7280
  • Vehicle: TJ - Der Panzer - CBR
Re: fitting new plates to my lsd
« Reply #13 on: April 13, 2010, 10:57:47 PM »

 :icon_redface: :icon_redface: :icon_redface: :003:
Logged
Taking ya girl to heaven & back

paulesc

  • Guest
Re: fitting new plates to my lsd
« Reply #14 on: April 14, 2010, 09:41:41 AM »

thanks for the reply's
ive been looking at prices,
aussie locker $239
ringpin $386
richmond $412
are they all the same kind of thing? i mainly drive on the road, but do like to go off road.
Logged

paulesc

  • Guest
Re: fitting new plates to my lsd
« Reply #15 on: April 20, 2010, 03:49:55 PM »

do you think i would be better off leaving the rear diff alone for now and fitting type of locker in the front?
would this be ok for road use in 2wd
Logged
Pages: [1]   Go Up
 

Powered by EzPortal