Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: TJ wheels and tires question  (Read 9147 times)

0 Members and 1 Guest are viewing this topic.

Nosebolt

  • Club Member
  • Forum Member
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 42
TJ wheels and tires question
« on: July 14, 2023, 06:57:36 AM »

one for the hive mind, I am looking at new tires, and TBH this is 70% looks 30% performance.

My problem is a lot of conflicting info, so a few questions

how big can I go without a lift?
are Puck lifts OK/safe?
how much effect does wheel offset have?
if I go for 285/75r16 (these are just under 33") what are the min mods needed?
Logged

vince

  • Forum Member
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 8
  • Vehicle: XJ
  • Year: 1993
    • jeeptrek
Re: TJ wheels and tires question
« Reply #1 on: August 14, 2023, 11:30:02 PM »

I ran 265/75R16 on a 2" SkyJacker lift kit with stock wheels and flares. Tyre tread was covered and the Jeep worked well off-road.
The tyres were fitted a few days before the lift and from what I remember it was driveable on the street. Didn't try it off-road with the 265 tyres without the lift.

The 235/75R16 is fine with no lift on stock wheels.
Logged

Jonny Jeep

  • Regular Member
  • Forum Member
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: TJ wheels and tires question
« Reply #2 on: August 17, 2023, 07:16:48 PM »

I ran 33 x 12.5 x 15 tyres on 15 x 8 wheels with 4" backspacing for a few weeks before lifting my TJ. Anything more than the smallest of bumps or any flex could result in rubbing.

Typically you would need 3-4 inches of lift to run 33s on a TJ, and may need to add a washer or two to the steering stop bolts if there's any rubbing at full lock.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal