Topic: New tyres (Read 6473 times)

kwfulton427 · « **on:** April 20, 2006, 05:03:53 PM »

Well, my tread is wearing thin, and i've got a slow leak in one, so i figured i'd retire them... but I was wondering, after i regear the axles, will my tiny little 4 banger be able to push 35s? or should I stick to the 32/33 range?

king cj · « **Reply #1 on:** April 20, 2006, 05:05:55 PM »

with deeper gearing it will about 4.88s should be about right

kwfulton427 · « **Reply #2 on:** April 20, 2006, 05:09:03 PM »

also, i want a more aggresive mud tire, but all the ones i've found aren't e-marked. I found kingoffroad.co.uk, but it seems all thier tires are retreads,/remoulds. I know I could easily go with the wrangler MTs or BFG MTs, but i kinda wanted something with a little more bite

Mike Pavelin · « **Reply #3 on:** April 20, 2006, 05:24:22 PM »

Nothing wrong with remoulds, the 2.5 isn't the fastest thing in the world after all. Look at Bronco 4x4's site, and check out Grizzly Claws. Plenty agressive enough.

Psychoman · « **Reply #4 on:** April 20, 2006, 05:34:52 PM »

Check out the tyres poll thread below for further thoughts! Still haven't made my mind up. I love the Grizzley's in the mud, but they aren't that cheap any more... especially in the bigger sizes... :cry:

ExtremeTJ · « **Reply #5 on:** April 20, 2006, 05:35:24 PM »

Grizzlys are good but at about 90 the lugs start to fly off...... :werd:

Psychoman · « **Reply #6 on:** April 20, 2006, 05:51:30 PM »

That's what you get for using your Jeep on a track day! Of course it wasn't on the public highway, ossifer. :roll:

kwfulton427 · « **Reply #7 on:** April 20, 2006, 05:55:41 PM »

on the regearing topic, should i regear the front and back to match? or should they be offset?

Psychoman · « **Reply #8 on:** April 20, 2006, 05:57:53 PM »

The ratios have to match, unless you plan on exploding your gearbox or one or both axles!

kwfulton427 · « **Reply #9 on:** April 20, 2006, 06:08:22 PM »

ok, so 4.88 front and back, 35s and a 4" long arm kit and I should be happy right?

isle of man · « **Reply #10 on:** April 20, 2006, 06:13:24 PM »

i have 5.13 r&p with 35"inch tyre and still feel as i have not gone enough.......if i had the choice again i will go deeper or automatic.

peter henry

kwfulton427 · « **Reply #11 on:** April 20, 2006, 06:24:16 PM »

hmm... I cant seem to find anything over 4.88... any tips?

isle of man · « **Reply #12 on:** April 20, 2006, 06:36:07 PM »

what are your front and rear axle?

peter henry

kwfulton427 · « **Reply #13 on:** April 20, 2006, 06:40:45 PM »

30 front/35 rear

isle of man · « **Reply #14 on:** April 20, 2006, 06:49:00 PM »

ok now i understand.......my tip is don't put 35" tyres on maximum tyre 33" and go 4.56 r&p

peter henry

MK1 · « **Reply #15 on:** April 20, 2006, 06:59:25 PM »

I have a similar thread going regarding 35s on my CJ with a Dana 30 front.

Have a look.

http://www.birtydastardsjeepclub.com/fo ... php?t=2261

Mike Pavelin · « **Reply #16 on:** April 20, 2006, 07:04:52 PM »

Never had anything fly off my Grizzlys, and the old XJ regularly goes over 90!

kwfulton427 · « **Reply #17 on:** April 20, 2006, 07:05:07 PM »

i think your link may be broken

MK1 · « **Reply #18 on:** April 20, 2006, 07:21:33 PM »

And this one.

http://www.birtydastardsjeepclub.com/fo ... php?t=2239

Author Topic: New tyres (Read 6473 times)

kwfulton427

New tyres

king cj

(No subject)

kwfulton427

(No subject)

Mike Pavelin

(No subject)

Psychoman

(No subject)

ExtremeTJ

(No subject)

Psychoman

(No subject)

kwfulton427

(No subject)

Psychoman

(No subject)

kwfulton427

(No subject)

isle of man

(No subject)

kwfulton427

(No subject)

isle of man

(No subject)

kwfulton427

(No subject)

isle of man

(No subject)

MK1

(No subject)

Mike Pavelin

(No subject)

kwfulton427

(No subject)

MK1

(No subject)