Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: electric seats  (Read 6485 times)

0 Members and 1 Guest are viewing this topic.

Anonymous

  • Guest
electric seats
« on: May 02, 2006, 12:55:52 PM »
i need some guidance before i start ripping the interior to bits trying to find the problem......

both the seats in our latest xj have stopped working (both at the same time, which would rule out anything on the seats themselves).....anyone know of a common fault to cause this or a place to start investigating??

cheers in advance
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #1 on: May 02, 2006, 01:03:51 PM »
give them both to me for nothing that will solve it
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Anonymous

  • Guest
(No subject)
« Reply #2 on: May 02, 2006, 01:05:29 PM »
Could start with the fuses..... :D
Logged

Anonymous

  • Guest
(No subject)
« Reply #3 on: May 02, 2006, 01:06:15 PM »
what are we supposed to sit on then??? :roll:

really......some people!!!!!

what do you want lecky seats for anyway??
Logged

Anonymous

  • Guest
(No subject)
« Reply #4 on: May 02, 2006, 01:13:17 PM »
Quote from: "EvilEd"
Could start with the fuses..... :D


the same fuse controls the central locking & as that is working i am assuming thats not the problem.....
Logged

Anonymous

  • Guest
(No subject)
« Reply #5 on: May 02, 2006, 01:21:42 PM »
Maybe is has a weight sensor and after you ate all your easter eggs, it's decided not to work anymore  :twisted:

Where do the wire run? are they down the centre console (Shared earth) or out near the door pillars? I guess there's a control module for them with big trannies or relays in it to run the power... have you found that yet?
Logged

Anonymous

  • Guest
(No subject)
« Reply #6 on: May 02, 2006, 01:23:35 PM »
from memory, the wiring for em runs into & thro the centre console.......

none of the relays in the board are marked up to run the seats, but there is probably one in a real stupid place knowing jeep......
Logged

Anonymous

  • Guest
(No subject)
« Reply #7 on: May 02, 2006, 01:31:47 PM »
More likely a "Control Unit" with a number of small Relays or more likely large transistors I would have thought to feed the various motors... one  for each motor at least I would expect, poss one for each motor in each direction....

Likely points would be a bad earth in the center there somewhere, or the power to the control box, wherever that is (Or it's earth)

EE :twisted:
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #8 on: May 02, 2006, 01:36:33 PM »
What year's yur XJ? most have a thermal cutoff in the fusebox as well.
Logged

Anonymous

  • Guest
(No subject)
« Reply #9 on: May 02, 2006, 01:38:11 PM »
Quote from: "Mike Pavelin"
What year's yur XJ? most have a thermal cutoff in the fusebox as well.


tis a 93.........
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #10 on: May 02, 2006, 07:57:22 PM »
.......except yours! :oops:
Logged

Anonymous

  • Guest
(No subject)
« Reply #11 on: May 02, 2006, 07:58:50 PM »
Am I the only one that finds that incredibly funny  :twisted:
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #12 on: May 02, 2006, 08:15:27 PM »
seems so.
Logged

Anonymous

  • Guest
(No subject)
« Reply #13 on: May 02, 2006, 09:48:04 PM »
Positive v positive ie the seats have reacted to the shirts????

Sounds like wiring/connections but what do I know :?
Logged

steve.wickes

  • Guest
(No subject)
« Reply #14 on: May 02, 2006, 10:48:55 PM »
Hi KD.

Had the same problem with mine and it was down to a break in the cables going to the seats. Couldn't manage to trace the break without hauling out the entire centre console, so I ran a new live from the fuse (after disconnecting the old one) and picked up the earth on one of the seat bolts.

Providing your break is before the split (to feed both seats) you only need to run a live to one seat and it will power both. Just cut in to the live and earth at the seat end to connect your new cables, and make sure that your cable is heavy enough to take the load. (current I mean, not you with the Easter Eggs!!!)

Steve
Logged

Ric Jacques

  • Guest
(No subject)
« Reply #15 on: May 02, 2006, 11:03:27 PM »
Just read through this thread.  Bubba you crack me up!!  :beerchug:
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal