Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Remote fob  (Read 8763 times)

0 Members and 1 Guest are viewing this topic.

Bigmadgregor

  • Guest
Remote fob
« on: December 12, 2007, 08:40:50 PM »
Hi again all,

Anybody know the best replacement for a 96 XJ cherry remote key fob?

I only got one when i bought it and the rubber/button is missing so that the actual switch on the pcb is exposed. It still works (just) but i don't want to be stuck without it  :cry:

Allthe replacements on ebay seem to be two button models and i'm not sure of compatability.
Anyone replaced one of these? anything i should avoid?

ta in advance.
Logged

tim_aka_tim

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #1 on: December 12, 2007, 08:55:59 PM »
The answer to this is in here somewhere, but I'm buggered if I can find it. Use the search function above and you'll get it.

Edit:

You just have one button on your remote? Any chance of a picture?
Logged

Bigmadgregor

  • Guest
(No subject)
« Reply #2 on: December 12, 2007, 09:19:33 PM »
had a look but most posters seem to be a confused like me... :?
here is the fob i have. I'm guessing since its not chrysler or jeep branded its a generic aftermarket (dealer fitted?)?

any help/guidance appreciated :)

Logged

tim_aka_tim

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #3 on: December 12, 2007, 09:23:46 PM »
Jeep stopped using single button fobs in 1992. Looks like as you suspect, you have a non-standard one. A dealer would probably only fit a Chrysler one. Mr. Pavelin would confirm that.
Logged

Bigmadgregor

  • Guest
(No subject)
« Reply #4 on: December 12, 2007, 09:27:53 PM »
ah bugger it...

big smelly :!:
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #5 on: December 12, 2007, 09:35:23 PM »
Go to a local alarm specialist, they may be able to clone the remote.
Logged

The Smiths

  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 1084
(No subject)
« Reply #6 on: December 12, 2007, 11:17:25 PM »
Quote from: "tim_aka_tim"
Jeep stopped using single button fobs in 1992. Looks like as you suspect, you have a non-standard one. A dealer would probably only fit a Chrysler one. Mr. Pavelin would confirm that.


I have a one bottom fob on a 1995 Cherokee, Chrysler branded and fitted by dealer (got receipt in owners pack)  :?

But mine is different to the one with the problem
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund: http://www.justgiving.com/The-Smiths-2015

Mick O

  • Mickosaurus
  • Founder
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 2426
(No subject)
« Reply #7 on: December 13, 2007, 08:23:31 AM »
My old 96 had one too.


 8)
Logged
I'm not a complete idiot.......................some bits are missing


AKA Jurassic O




Mike Pavelin

  • Guest
(No subject)
« Reply #8 on: December 13, 2007, 08:55:34 AM »
The original wedge shaped two button remote will work the central locking but won't operate the alarm system.
Logged

Bigmadgregor

  • Guest
(No subject)
« Reply #9 on: December 13, 2007, 10:06:20 AM »
just to clarify, the fob i have above operates the central locking, the alarm and the immobiliser (which is a constant pain and times out after about 25-30 secs if you open the car and don't turn the ignition.

it has one button on it that both locks and unlocks the car.

As far as i can tell it sends to the little dome in the middle of the cab and their are two alarm sensors at the front of the jeep on either side of the windscreen.  I will take some pictures later and you guys can tell me if its a non standard system or just a non standard fob. I'm hoping the latter  :(

so Mike if i understand you correctly, if i were to replace mine with the two button lock/unlock type. i would still need the one i have to operate the alrm/immoboliser?

I was hoping for 20 quid off of eblag and some handy instructions... :lol:
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #10 on: December 13, 2007, 10:36:29 AM »
The remote you have is for a retro fitted alarm system (either official Jeep UK or not) and is a radio remote. The vehicle was originally supplied with a two button infra red remote that usually goes missing if an aftermarket alarm is fitted. The dome in the roof console is indeed the infra red receiver but is redundant unless you have the original type remote. Both of the available alarm systems fitted by UK Jeep dealers were rebadged versions of propriotary aftermarket systems, but both are very old now and it is difficult to get replacement remotes for them. IIRC the single button version was called the TC-1 but don't quote me on that. You might get lucky and find that you can still get a replacement from Jeep, then you need to find a dealer who still knows how to program the system to accept it. Information on these systems is very scarce as it was a UK only thing and doesn't appear in any Jeep literature. Alternatively I believe some specialists can clone remotes by copying the signal from the existing remote onto another via a computer. Try these guys.... http://www.alarmremotes.co.uk/ Worst ways, take the thing out and get a modern system fitted or do without.
Logged

Bigmadgregor

  • Guest
(No subject)
« Reply #11 on: December 13, 2007, 11:02:11 AM »
Thnaks Mike I understand now... soz it took a while to sink in.
Logged

Mick O

  • Mickosaurus
  • Founder
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 2426
(No subject)
« Reply #12 on: December 13, 2007, 12:07:08 PM »
Yep, Mike is right (again), the system was called TC 1.

When I first got my XJ it had a single button fob with the name Sigma on it.

Managed to get a couple of genuine chrysler fobs of e-blag.

My local stealer programmed one for me.

 8)
Logged
I'm not a complete idiot.......................some bits are missing


AKA Jurassic O




Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal