Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Hardtop/Softop  (Read 5476 times)

0 Members and 2 Guests are viewing this topic.

johnf

  • Guest
Hardtop/Softop
« on: December 29, 2008, 03:37:47 PM »
I will hopefully being picking up a Hardtop for my TJ soon, however, will I have to remove the softtop before fitting hardtop? and will hardtop fit with roll cage in place, center cross bar seems rather high :oops:  :?:  :?: Supid questions maybe, but the more i get involved with these jeep things, the more suprises they seem to hold.
Thanks in advance
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #1 on: December 29, 2008, 04:09:23 PM »
you will have to remove the soft top and all its frame. the hard top will fit over a factory cj cage. 8-)
Logged

johnf

  • Guest
(No subject)
« Reply #2 on: December 29, 2008, 04:29:54 PM »
Cheers for that, soft top frame looks easy to remove, just 4 star drive bolts as far as I can see. :?:
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #3 on: December 29, 2008, 07:52:51 PM »
swap the 4 bolts for some stainless bolts while your at it
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

Panic mechanic!

  • Guest
(No subject)
« Reply #4 on: December 29, 2008, 09:05:10 PM »
you can get away with fitting the hardtop over the lip mounted to the top of the screen, otherwise you may have to remove that as well if you have hte correct seal for the front edge
Logged

Bishops Finger

  • Guest
(No subject)
« Reply #5 on: December 29, 2008, 09:24:32 PM »
Bolts are a pain..
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal