Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: 242j t case into 97 zj 4.0  (Read 3610 times)

0 Members and 1 Guest are viewing this topic.

Jamie_stafford

  • Guest
242j t case into 97 zj 4.0
« on: March 18, 2016, 11:59:55 AM »
Hi all! I have a chance at a 242j transfer case with the better drive options
- 2 Wheel Drive
- 4 Part-Time
- 4 Full-Time
- Neutral
- 4 Low

What would I need to do to swap it into my zj? I believe it's from an early 4.0 xj
Logged

daggie

  • Moderator
  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
Re: 242j t case into 97 zj 4.0
« Reply #1 on: March 18, 2016, 06:36:48 PM »
it should do
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

JamesH

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
Re: 242j t case into 97 zj 4.0
« Reply #2 on: March 22, 2016, 08:57:24 AM »
Think you just need new or altered prop shafts
Logged

dtooth

  • Guest
Re: 242j t case into 97 zj 4.0
« Reply #3 on: March 22, 2016, 10:30:42 AM »
At worst you need to swap the input shaft from the 249
Logged

scrw

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 749
  • Vehicle: jeep
  • BD, Fred Kite reincarnated
Re: 242j t case into 97 zj 4.0
« Reply #4 on: March 22, 2016, 11:15:11 AM »
 :iagree: isn't there a different spline count on the input shaft, could be mixing up with WJ info tho
Logged

dtooth

  • Guest
Re: 242j t case into 97 zj 4.0
« Reply #5 on: March 23, 2016, 06:26:12 AM »
I think it's the depth of the input shaft that s different . May have look at the collection of TC I've acquired
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal