Topic: 242j t case into 97 zj 4.0 (Read 2567 times)

Jamie_stafford · « **on:** March 18, 2016, 11:59:55 AM »

Hi all! I have a chance at a 242j transfer case with the better drive options
- 2 Wheel Drive
- 4 Part-Time
- 4 Full-Time
- Neutral
- 4 Low

What would I need to do to swap it into my zj? I believe it's from an early 4.0 xj

daggie · « **Reply #1 on:** March 18, 2016, 06:36:48 PM »

it should do

JamesH · « **Reply #2 on:** March 22, 2016, 08:57:24 AM »

Think you just need new or altered prop shafts

dtooth · « **Reply #3 on:** March 22, 2016, 10:30:42 AM »

At worst you need to swap the input shaft from the 249

scrw · « **Reply #4 on:** March 22, 2016, 11:15:11 AM »

isn't there a different spline count on the input shaft, could be mixing up with WJ info tho

dtooth · « **Reply #5 on:** March 23, 2016, 06:26:12 AM »

I think it's the depth of the input shaft that s different . May have look at the collection of TC I've acquired

Author Topic: 242j t case into 97 zj 4.0 (Read 2567 times)

Jamie_stafford

242j t case into 97 zj 4.0

daggie

Re: 242j t case into 97 zj 4.0

JamesH

Re: 242j t case into 97 zj 4.0

dtooth

Re: 242j t case into 97 zj 4.0

scrw

Re: 242j t case into 97 zj 4.0

dtooth

Re: 242j t case into 97 zj 4.0