Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Noisy UJ  (Read 6377 times)

0 Members and 2 Guests are viewing this topic.

scrw

  • Guest
Noisy UJ
« on: April 20, 2009, 02:33:55 PM »
Getting the creak/click noise when pulling away on full lock on the drivers side, just jacked it up and there is no play in the UJ or ball joints. The current UJs are only 6 months old, if they were noisy would it show up in movement in the joint?
Logged

Mike Pavelin

  • Guest
Re: Noisy UJ
« Reply #1 on: April 20, 2009, 06:50:01 PM »
Check the bolts that hold the steering box are tight and that there are no cracks in the chassis in that area. Also check the bracket holding the track bar to the chassis on the other side is FT.
Logged

gordy

  • Guest
Re: Noisy UJ
« Reply #2 on: April 21, 2009, 04:39:55 PM »
I had the same noise as you, for me it was the track bar bolt where it attaches to the axle.  Got a new high tensile bolt and torqued it FT.
Logged

scrw

  • Guest
Re: Noisy UJ
« Reply #3 on: April 21, 2009, 04:51:51 PM »
all bits tight / not cracked. Will get the other half to turn the steering while I am under the motor to see whats going on. I swear its the UJ clicking but there is no play in it whatsoever and the are only 6 months old  :-?
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal