Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[greggmo]

does any one have a set of bearings or a rebuild kit for a yj dana 30 axle. the reason i ask is that i need the numbers off the bearings themselves not the part number. i need to rebuild me axle but i gotta do it as cheap as pos so i spoke to the nice chap at dana and he said if i can get the numbers he might be able to help. i think this will be a cheaper option see. any help would be gratefully received guys.

[JamesH]

I'm just doing my XJ Dana 30. It's high pinion with shims rather than crush sleeve on the pinion. Is that the same as on th YJ?? I can get you the bearing numbers if they'll be useful.

[greggmo]

bearing numbers would be cool ta mate.

[JamesH]

What an arse of a job! I'll dig out the bearings numbers later, I also have some carrier bearings with the centre enlarged to use as setup bearings. If you want to borrow them I could post them to you??

[JamesH]

Carrier bearings, Timken LM 501349  778 - bearing race 501314  778

Pinion (rear most, pressed into diff housing), Timken 02872 - bearing race 02820


Unfortunately I'd pressed the new bearing onto the pinion shaft before I realised that the number on the old bearing was unreadable. However, I still have it and could post you the actual bearing if it'd be any good?? Sorry for not getting you the complete set  

[greggmo]

james you are a star mate. i can give my man at dana a try now. thanks for your time mate.