Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: XJ 4.0 Auto 1993 removing the AC pump, shorter serpentine belt length?  (Read 1803 times)

0 Members and 1 Guest are viewing this topic.

Green Jeep

  • Guest
XJ 4.0 Auto 1993 removing the AC pump, shorter serpentine belt length?
« on: June 25, 2009, 10:05:59 AM »
Hi,

Just wondered if anyone knows the correct or even a rough idea of the length of the belt needed if you remove the AC pump? Standard length is 2150mm (from memory)

Or can it not be done? Different route?

I offered up the spare belt from a Wrangler 4.0 Manual with no AC and it was way to short 1800mm.

Any idea's? Many thanks in advance Maf
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
Re: XJ 4.0 Auto 1993 removing the AC pump, shorter serpentine belt length?
« Reply #1 on: June 25, 2009, 05:03:59 PM »
ive seen it done but cant remember where. have you tried naxja or pirate4x4
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

donk498

  • Guest
Re: XJ 4.0 Auto 1993 removing the AC pump, shorter serpentine belt length?
« Reply #2 on: June 25, 2009, 09:27:19 PM »
Have a look here  http://www.offroading.net/forum/viewtopic.php?f=41&t=3518&p=19405#p19405

The part number of the belt i used is Gates micro-v 6PK2238 68464, but it depends on the pulley layout. Mines the same as the last pic.
Its still running like that with no problems.

Dave.
Logged

Green Jeep

  • Guest
Re: XJ 4.0 Auto 1993 removing the AC pump, shorter serpentine belt length?
« Reply #3 on: June 26, 2009, 04:47:05 PM »
Excellent stuff, I'll get one of those belts and let you all know, happy days, Maf
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal