Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[isle of man]

http://motorsports.axletech.com/

[Lornaben]

 

[daggie]

 

[jimyj]

i dont even wanna think how much they are 

[Dave The Sparky]

If you dig deep enough on the site it tells you the prices but i suggest you have a stiff drink first!

[Bubba]

very nice

[tim_aka_tim]

$6495 per set (whatever that means - per axle maybe?)

[Roland]

I think it's all four corners.  But you need Dana 60's on top of that. 

Each portal conversion kit features
• Four drive/steer wheel ends with a direct interface to a Dana 60 kingpin inner “C” (high strength
inner “C” recommended) for the four wheel steering configuration
• Two drive/steer wheel ends with a direct interface to a Dana 60 kingpin inner “C” (high strength
inner “C” recommended) and two drive only wheel ends with adaptors to a Dana 60 rear axle for
the two wheel steering configuration.
• 4 gear configuration (no flipped carriers or reverse rotation gearing required)
• 1.5” diameter / 35 spline 4340 steel input shafts
• 2” diameter / 41 spline 4140 steel output shafts
• Single Wilwood four piston caliper per wheel end
• CTIS upgrade if desired at no additional charge