July 03, 2025, 08:36:52 AM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
XJ brake servo
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: XJ brake servo (Read 2784 times)
0 Members and 1 Guest are viewing this topic.
bill99
Guest
XJ brake servo
«
on:
August 11, 2009, 12:40:29 AM »
Recently I’ve noticed brakes were a bit soft but as I had to have a new set of brake pipes fitted for the mot I was hoping that new pipes and a service would have improved the situation but they are exactly the same, the pads etc are all good and the fluid bled thru with the new pipes.
So the question is are there any known weak points with the brake servo system that I should know about before we dive into that.
XJ 4ltr petrol 1999.
Bill
Logged
sprintagogo
Guest
Re: XJ brake servo
«
Reply #1 on:
August 11, 2009, 08:20:31 AM »
Check the rear drum brakes are adjusted properly. They are supposed to be self adjusting but this is a bit hit'n'miss so it is always worth manually adjusting them from time to time.
Also, when working on the brake lines it is critical not to allow air into the ABS pump. If air does get that far then the only remedy is to plug in the correct diagnostic computer and cycle the pump through a purge program. As your brakes were soft before and after the brake line work it doesn't sound as though this is the problem.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
XJ brake servo
Powered by
EzPortal
Go Up
Go Down