May 10, 2025, 11:48:19 AM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
Thermostat vs EFI
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: Thermostat vs EFI (Read 11005 times)
0 Members and 1 Guest are viewing this topic.
kwfulton427
Guest
Thermostat vs EFI
«
on:
September 07, 2005, 05:32:32 PM »
I know some efi's vary the fuel/air mixture based on the temp of the engine... is this the case for a TJ? and if so, can the sensors be changed to run at a cooler temp? say, 160 or 180?
Logged
Hoodoo
Guest
(No subject)
«
Reply #1 on:
September 08, 2005, 06:36:48 PM »
The sensor varies the mixture over the entire operating range of the engine. If you want the normal operating temperature to alter, you'll have to get a thermostat rated at a different temperature to the one currently in the vehicle.
Regards,
Logged
Mike Pavelin
Guest
(No subject)
«
Reply #2 on:
September 08, 2005, 08:33:33 PM »
:? What are you trying to achieve?
Logged
Dingo
Guest
(No subject)
«
Reply #3 on:
September 08, 2005, 09:46:03 PM »
A large backfire with flames
Logged
Anonymous
Guest
(No subject)
«
Reply #4 on:
September 08, 2005, 09:58:06 PM »
I've tried Encona fuelled curries for that effect...
Logged
Dingo
Guest
(No subject)
«
Reply #5 on:
September 08, 2005, 10:02:41 PM »
How do you get them in the tank, Funnel?
Logged
kwfulton427
Guest
(No subject)
«
Reply #6 on:
September 08, 2005, 10:06:05 PM »
lets say I put a 160 degree thermostat in... would this cause the fuel mixture to run rich because the sensor thinks the engine hasn't warmed up yet?
Logged
Bubba
"Cooter"
Marshal
Guru
Guru: 69
Offline
Posts: 21029
(No subject)
«
Reply #7 on:
September 08, 2005, 11:11:21 PM »
noooo dont mess you wont gain anything worth having
Logged
trucks
shedric
cletus
mr whippy
I spent most of my money on alcohol, women and old iron........ the rest of it I just wasted.
greggmo
Founder
Guru
Guru: 2
Offline
Posts: 8230
(No subject)
«
Reply #8 on:
September 08, 2005, 11:24:42 PM »
there are better ways of wringing a bit more out of yer 4 popper. throttle boddy spacer, k&n and so on.
Logged
Dingo
Guest
(No subject)
«
Reply #9 on:
September 09, 2005, 03:00:00 AM »
More fuel and less air wouldn't make it go any better, think about a carbed engine, imagine its warm and then put the choke on. Wont go, but it'll use a lot more juice. More air less fuel is the way to go. I think.
Logged
chrisjones
Guru
Guru: 4
Offline
Posts: 5841
Vehicle: Dogface
Sometimes I wonder....
(No subject)
«
Reply #10 on:
September 09, 2005, 07:46:22 AM »
More air AND more fuel is the way to go!
Logged
God was my copilot but we crashed in the mountains and I had to eat him.
Mike Pavelin
Guest
(No subject)
«
Reply #11 on:
September 09, 2005, 07:59:57 AM »
Won't make any noticable difference to performance. Engines are designed to work most efficiently at 180-190 so don't mess with it. If it runs too cool you could actually lose power.
The fuelling is controlled by the Jtec engine controller based on a set of data (or map) which is then constantly adjusted based on information from all the sensors on the engine, but the main player is the upstream oxygen sensor. Basically, once the engine is at operating temperature, the system reduces the fuelling until the sensor detects oxygen in the exhaust gases, then begins to ramp up the fuel until the oxygen disappears, then reduces it, increases etc etc... in an endless cycle. The only best way to get more power is to improve the engine's breathing, i.e. make it easier to get more air in and get rid of exhaust gases more efficiently. This could be through a larger throttle body, less restrictive air filter, forced induction or whatever, plus a more efficient exhaust system at the other end. If there is more oxygen available, the engine management will provide more fuel to get rid of it, and bingo! more power.
Logged
Dingo
Guest
(No subject)
«
Reply #12 on:
September 09, 2005, 10:35:14 AM »
Kind of what I was thinking
, but on a more technical level, well explained Doc.
Logged
kwfulton427
Guest
(No subject)
«
Reply #13 on:
September 28, 2005, 03:15:28 PM »
thanks for the info...
i'd like to take a poll... what temp do your TJs actually operate at?
mine sits steady at 210
Logged
Manda
AKA Dangerous Doris
Founder
Guru
Guru: 0
Offline
Posts: 3322
(No subject)
«
Reply #14 on:
September 28, 2005, 03:31:20 PM »
210? I presume that's farenheit?
Mine sits just a smidge under 100c.
Logged
AKA Dangerous Doris
Anonymous
Guest
(No subject)
«
Reply #15 on:
September 28, 2005, 03:36:43 PM »
~100c unless the rad is blocked
Logged
kwfulton427
Guest
(No subject)
«
Reply #16 on:
September 28, 2005, 04:37:59 PM »
yeah, its 210f (bout 100c)
Logged
Mike Pavelin
Guest
(No subject)
«
Reply #17 on:
September 28, 2005, 07:43:43 PM »
It should hover around the 210/100 mark
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
Thermostat vs EFI
Powered by
EzPortal
Go Up
Go Down