Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: banging noise on 96 jeep grand cherokee  (Read 18816 times)

0 Members and 1 Guest are viewing this topic.

kitch

  • Guest
banging noise on 96 jeep grand cherokee
« on: September 12, 2005, 06:21:05 PM »
hi all hope you can help?i have a banging noise coming from the drivers side wheel area, you can feel it on the foot well, happens at all speeds but can be heard most when on rough road or if going over a bump and a clunk will be heard any ideas folks?
Logged

chrisjones

  • Guru
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
(No subject)
« Reply #1 on: September 12, 2005, 06:52:04 PM »
First place I'd look is your anti-roll bar and control arm bushes.  Then check all the joints and bushes in the steering.  Chances are something is worn.
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

Anonymous

  • Guest
(No subject)
« Reply #2 on: September 12, 2005, 07:15:24 PM »
It'll be a cat, happened to me when I ran over a cat...It'll stop when it starves  :lol:
Logged

Anonymous

  • Guest
(No subject)
« Reply #3 on: September 12, 2005, 07:33:00 PM »
Quote from: "chrisjones"
First place I'd look is your anti-roll bar and control arm bushes.  Then check all the joints and bushes in the steering.  Chances are something is worn.


I have exactly the same thing on my ZJ! Its the anti roll bar! When I disconect it going off road the noise totaly goes! So either get disconects or do the bushes! To be honest mine aint been conected for months :D
Logged

kitch

  • Guest
anti roll bar
« Reply #4 on: September 12, 2005, 08:17:26 PM »
cheers for the advice but how do i tell which is the anti roll bar and how do i remove it if i choose to :D
Logged

Anonymous

  • Guest
(No subject)
« Reply #5 on: September 12, 2005, 08:37:34 PM »
Its a bar from hub to hub, runs from behind each hub mounting, as you look at the hub it will be in th left hand side of the assembly, and a mirror image on the other side. Its busheled and  curves foward before curving back towards the opposide side.
Logged

Anonymous

  • Guest
(No subject)
« Reply #6 on: September 12, 2005, 10:33:01 PM »
Owen

Its still on?!
Logged

chrisjones

  • Guru
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
Re: anti roll bar
« Reply #7 on: September 13, 2005, 12:25:01 AM »
Quote from: "kitch"
cheers for the advice but how do i tell which is the anti roll bar and how do i remove it if i choose to :wink:
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

Anonymous

  • Guest
(No subject)
« Reply #8 on: September 13, 2005, 06:13:50 AM »
Quote from: "Stew"
Owen

Its still on?!


What??
Logged

Anonymous

  • Guest
(No subject)
« Reply #9 on: September 13, 2005, 08:51:19 AM »
Eh?
Logged

Anonymous

  • Guest
(No subject)
« Reply #10 on: September 13, 2005, 09:03:20 AM »
That's wot 'orses eat :idea:
Logged

Anonymous

  • Guest
(No subject)
« Reply #11 on: September 13, 2005, 09:52:18 AM »
No thats ay
Logged

Anonymous

  • Guest
(No subject)
« Reply #12 on: September 13, 2005, 10:01:53 AM »
Ahh, it was the accent that fooled me... :?
Logged

horobi

  • Guest
(No subject)
« Reply #13 on: September 13, 2005, 10:39:45 AM »
Quote
It'll be a cat, happened to me when I ran over a cat...It'll stop when it starves



I just have to say that I thought this was hilarious (if a little sick).....

credit where credits due.......

 =D>
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal