Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: 2000\2001 distributor-less 4.0 cracked head.  (Read 2262 times)

0 Members and 1 Guest are viewing this topic.

haslamg

  • Guest
2000\2001 distributor-less 4.0 cracked head.
« on: October 31, 2009, 11:29:32 AM »

Folks

The yanks get pretty excited about this issue.

Casting # 0331 is the apparently the culprit as the head was refined to increase power and reduce emissions, but is weaker between cylinders 3 and 4 and can crack.

Does anyone know about this happening in the UK with the Austrian-built units?  I was going to look at a 60th anniversary 2001 XJ with 60K on it, today but am slightly tentative now....

Thanks.

G.





Logged

gordy

  • Guest
Re: 2000\2001 distributor-less 4.0 cracked head.
« Reply #1 on: October 31, 2009, 05:10:02 PM »

I've read a bit about this issue on NAXJA and are therefore aware of the issue but thats all I know. 
Logged

haslamg

  • Guest
Re: 2000\2001 distributor-less 4.0 cracked head.
« Reply #2 on: October 31, 2009, 10:59:48 PM »

Well, I went to see it.

Not a drop of coolant in the bottle, cracked exhaust manifold and much oil sweating between the head and block.  I walked away...

These cars look great on photos, until you get there in person :)

G.
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: 2000\2001 distributor-less 4.0 cracked head.
« Reply #3 on: October 31, 2009, 11:17:23 PM »

i think maybe you do yhe rite thing
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Mike Pavelin

  • Guest
Re: 2000\2001 distributor-less 4.0 cracked head.
« Reply #4 on: November 01, 2009, 08:53:26 AM »

Folks

The yanks get pretty excited about this issue.

Casting # 0331 is the apparently the culprit as the head was refined to increase power and reduce emissions, but is weaker between cylinders 3 and 4 and can crack.

Does anyone know about this happening in the UK with the Austrian-built units?  I was going to look at a 60th anniversary 2001 XJ with 60K on it, today but am slightly tentative now....

Thanks.

G.






Logged

Mike Pavelin

  • Guest
Re: 2000\2001 distributor-less 4.0 cracked head.
« Reply #5 on: November 01, 2009, 08:55:46 AM »

Folks

The yanks get pretty excited about this issue.

Casting # 0331 is the apparently the culprit as the head was refined to increase power and reduce emissions, but is weaker between cylinders 3 and 4 and can crack.

Does anyone know about this happening in the UK with the Austrian-built units?  I was going to look at a 60th anniversary 2001 XJ with 60K on it, today but am slightly tentative now....

Thanks.

G.







No such thing as an Austrian built XJ, they came from Toledo like all proper Jeeps do.

And, yes they crack heads just the same over here.
Logged

BOP

  • Guest
Re: 2000\2001 distributor-less 4.0 cracked head.
« Reply #6 on: November 01, 2009, 10:51:18 AM »

Well, I went to see it.

Not a drop of coolant in the bottle, cracked exhaust manifold and much oil sweating between the head and block.  I walked away...

These cars look great on photos, until you get there in person :)

G.

I know the feeling, went and looked at 4 before I found one worth buying! If it was done on pictures alone i'd probably have bought the first one I saw!  :jpshakehead: always go have a look an a little test drive, I found one that looked perfect, had full service history, low miles for an 11 year old car, everything looked good until it was driven and found out it had some pretty major steering issues! If your at all unsure of what to look for I posted a thread up back in the summer asking for help on what to watch out for and got some good advice back which stopped me buying a munter!
Logged
Pages: [1]   Go Up
 

Powered by EzPortal