Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[lozuk]

I've just done a AZC self diagnostic test and it came up with the codes:
52 - AI (Recirc) door travel too large
54 - Left temp door travel too large
56 - Right temp door travel to large

Does this mean I have to cut behind the glove box to access theses doors?
Also the heated seats don't work (the light on the button comes on though) and the a/c button comes on when the car is started in the morning, will flash a bit and then go out. Could all of these thing be related?

Thanks in advance

[Mike Pavelin]

The blend air and recirc doors are all broken and the heat pad in the drivers seat cushion will be fooked.

[lozuk]

Thanks for replying. Any idea where I can buy some replacements from.

[scotty]

us ebay.search for blend doors, me dad had the same problem they arrived in a week and was done in a under a hour! now all works fine.


scotty

[lozuk]

Thanks for the replies. Is it only the US that we can get them from? Surely there must be some where over here we can get the blend door kit.

[tim_aka_tim]

Now you own a Jeep, better get used to getting parts from the USA. UK Jeep dealers are very expensive -
the blend door problem will cost you well over a thousand quid for a dealer to do it.

[lozuk]

I phoned a UK dealer to find out a price on the blend door kit and was told £130 +vat. Is this the same kit as on ebay? Will I be able to install this kit through the glove box and retain dual heater control or is it a totally different kit that needs to have the dash removed?

[Mike Pavelin]

No, that's the factory blend air door assembly. Full dash out job, a day's work. You also need a recirc door assembly. If you want the dash out job done properly with the pukka factory parts I know someone who will do it for about £500 if you can get it to Southend.

[lozuk]

So if I were to go the the dealers and buy the factory blend air door assembly can I fit it through the glove compartment?

[Bishops Finger]

lozuk....Id read the above post....

[lozuk]

Duh....just re-read it sorry. I won't be buying that then.
I've found a place in Bicester Oxfordshire that can fix it so that I'll still have dual control for £255 +vat which I think is pretty good.

[Bishops Finger]

EDM...

[scotty]

me dad tried them! didnt really seem to want to know much!! almost as if us phoning was a hassle! and they wont do any more than you will with the bits for a lot less plus they wont guarantee it!


scotty

[lozuk]

Thanks for that scotty.
I've watched the heater treater vid a few times and it doesn't look that difficult to do........I think I'll give it a go......watch this space!!!!