Topic: Body flexing? (Read 7057 times)

ferretjuggler · « **on:** March 16, 2010, 07:03:39 PM »

How much body flexing will I get on my 2 door FSJ when I cut the roof off?

I got a plan wot will circumnavigate all my damage/rust issues

Basic idea is to keep the standard fixed windshield and perimeter frame, the door tops will remain and a CJ styled roll bar behind the front seats wot I can pull a bikini top over in summer.

During the winter I will park it up and start saving for next summers petrol

It's just occuring to me that the body may flex across the door openings causing the gaps between the wings/door/rear sides to alter continiously.

That would be embaressing in the extreme. Like a Micky Mouse special.

Major fabrication work required?

?

Green Jeep · « **Reply #1 on:** March 16, 2010, 07:25:39 PM »

We crew cabbed my Cherokee a few months ago and put some strength back in, the whole thing works really well and we actually have a little more body flex which keeps the wheels on the deck.... tis post may or may not help, good luck and keep us informed, cheers Maf

http://www.birtydastards.com/frm/index.php?topic=11759.0

ferretjuggler · « **Reply #2 on:** March 16, 2010, 07:48:49 PM »

Cheers I read the thread already.
Different technology doin that to a unibody vehicle.
FSJ could be awkward.
Land Rovers (ooops sorry) got megga stiff chassis which is why the leaf sprung ones handle like skateboard

But no body flex issues as chassis is stiff as board.
Jeep chassis designed to twist somewhat, body too, but door openings pretty rigid.
Make the body too rigid and it will fight the chassis

stress cracking a good possibility.
Make the body too bendy you got a mobile jellywobbler

Bulldog67 · « **Reply #3 on:** May 30, 2010, 11:27:28 PM »

get goin with the project FJ, summer is here

http://www.ifsja.org/forums/vb/showthread.php?t=119303

ferretjuggler · « **Reply #4 on:** May 31, 2010, 12:35:12 AM »

Arrrrrrrrgh!........
I roll in from the pub and I'm confronted by an FSJ snuff movie

I only just realised the tailgate needs cutting down by 2", why the fuck aint I noticed that on any of the other choptop threads?

ferretjuggler · « **Reply #5 on:** May 31, 2010, 12:51:08 AM »

I got a Mahindra to build this summer, otherwise I'll be totally carbound all summer.

Everything else has gotta take a back seat or else I'll get nowhere at all.

Just remember "Any fool can restore a classic vehicle, it takes a man to cut one up"

From the IFSJA somewhere

Bubba · « **Reply #6 on:** May 31, 2010, 09:28:30 AM »

takes a man to cut one up ....only if its a rotter leave the fools to restore the good ones

wildwood · « **Reply #7 on:** May 31, 2010, 10:54:06 AM »

Seem to remember JP did this many moons ago with a very rare to us... mid 60's FSJ 2 door 'VAN'

The nostalgia freaks and resto cardigan wearers were outraged.

They ended up caging most of it to stop it flexing in the middle...... looked good no roof just pick up style cab top ..... 38s and a SBC 350

Bubba · « **Reply #8 on:** May 31, 2010, 11:05:21 AM »

it looked mean as a van my fave is the factory recovery job

ferretjuggler · « **Reply #9 on:** June 01, 2010, 09:45:27 PM »

FSJ panel vans are as rare as rocking horse shit over here, I've never seen one in the metal yet.

Rather sad to chop a good one if it were all solid

There was a 2 door wagoneer back in the '60s, then jeep dropped it.
But if ya look close at the narrowtrack Cherokee 2 door.........it's the panel van shell recycled for the '70s with some designer side windows stuffed in it.

Bulldog67 · « **Reply #10 on:** June 01, 2010, 10:00:19 PM »

so im even more exclusive than i imagined

isle of man · « **Reply #11 on:** June 01, 2010, 10:02:28 PM »

http://www.bachint.dk/shop/jeep-j20-4x4-876p.html

Bishops Finger · « **Reply #12 on:** June 01, 2010, 10:09:42 PM »

Not an ideal laning truck

Bulldog67 · « **Reply #13 on:** June 01, 2010, 10:47:54 PM »

part of that is givin me the heebies

Dave69 · « **Reply #14 on:** June 02, 2010, 06:49:36 PM »

looks very similar to a 110 country stuck on the back

ferretjuggler · « **Reply #15 on:** June 02, 2010, 07:05:35 PM »

Quote from: isle of man on June 01, 2010, 10:02:28 PM

http://www.bachint.dk/shop/jeep-j20-4x4-876p.html

Hmmmmmm.......Denmark......in the EU...no import duty.

J20 Military spec? They have 8 lug axles on em too.......

They have a standard body J20 also

I suppose their prices are $$$$$$$$$$$?

Bubba · « **Reply #16 on:** June 02, 2010, 07:38:33 PM »

go on just do it strike six would that be ?

ferretjuggler · « **Reply #17 on:** June 02, 2010, 07:46:06 PM »

Funds don't permit at present.

I'd rather get what I'm sitting on now sorted first anyway

Don't fall over in shock

Bulldog67 · « **Reply #18 on:** June 02, 2010, 07:59:30 PM »

Quote from: ferretjuggler on June 02, 2010, 07:46:06 PM

I'd rather get what I'm sitting on now sorted first anyway

unless soemthing else called old V8 jeep appears on the horizon

ferretjuggler · « **Reply #19 on:** June 02, 2010, 08:20:21 PM »

Quote

unless soemthing else called old V8 jeep appears on the horizon 003

It should appear this Sunday actually.

Bubba · « **Reply #20 on:** June 02, 2010, 08:21:21 PM »

speak to me

Bulldog67 · « **Reply #21 on:** June 02, 2010, 08:55:32 PM »

its called jeep meglomania

FJ could be Birties registered charity next year, help him with his illness

Bubba · « **Reply #22 on:** June 02, 2010, 08:58:17 PM »

beyond help

Bulldog67 · « **Reply #23 on:** December 22, 2011, 06:36:06 PM »

skip all the work dood

http://bakersfield.craigslist.org/cto/2761474625.html

Tank · « **Reply #24 on:** December 22, 2011, 09:20:28 PM »

Retro cool

Author Topic: Body flexing? (Read 7057 times)

ferretjuggler

Green Jeep

ferretjuggler

ferretjuggler

ferretjuggler

ferretjuggler

Bishops Finger

ferretjuggler

ferretjuggler

ferretjuggler

Tank