Hi all,
I have an Oil leak, seeminly engine oil slowly dripping from the bell housing plate and on the rear face of the oil pan down to the oil drain plug.
Is there an obvious oil seal behind the flywheel that could have gone or am I faceing the likely hood of the following:
REAR MAIN OIL SEALS
The crankshaft rear main bearing oil seal consists
of two half pieces of viton with a single lip that effectively
seals the rear of the crankshaft. Replace the
upper and lower seal halves as a unit to ensure leakfree
operation.
Does that mean both transmission removal and oil pan and rear crankshaft bearing case?
Any help greatfully appreciated and good news even more so.
Cheers Clayt
